L/F "Flat" Flap wheel disc

[Mike Byer]

These were actually made by Norton for a local kayak manufacturer to deburr 5/16-3/8 holes by pushing them thru and pulling them back while rotating. Somehow I ended up with a couple boxes.

 

[Alan Elzer]

Probably not, but I have a few I might share.

Mike what do you have

 

[Mike Byer]

I have what's shown in the pix that I posted. Tell me which one you want, and I'll send you a handful for the price of the postage. Keep in mind that they are threaded 8/32, you will have to make a mandrel to turn them. Pretty sure that I don't have any.

 

[Alan Elzer]

Mike thnx, I can make a mandrel. I'm guessing they different grit compound or are they the same? Can you do a raw prop start to finish on one disk? I'd like to try some though, not sure how many you have or would let go of. How can I pay you?
Alan Elzer, 812-453-8137, [email protected], 2122 N State Route 61, Boonville, IN. 47601

 

[Alan Elzer]

Dremel ez474sa
dremel ez474sa - Search (bing.com)

Thnx Mic, I've got some of those now.

 

[Alan Elzer]

Dremel makes some nice dog toenail trimming sanding discs with quick connects that work well if you like sandpaper discs. I think 3M has much better quality discs that last much longer.

Thanks For Reading,

Mark Sholund

Mark are the 3M ones 1" or close to that

 

[Alan Elzer]

I use these for working on props.
magnum polishers

Are they very flexible, how much are they for box of say medium grit & the mandrel cost

 

[Alan Elzer]

Alan, I’ve used mini flap wheels of the flat style but the smallest was 2” dia on a 1/4” die grinder. If you find a source for 1” let me know I’d slit an order with you if the minimum is large.
John

I have too but wanting 1 "

 

[Alan Elzer]

Not sandpaper but make a nice finish.

1" Non Woven Coarse/Medium/Fine Grit Discs Surface Polishing Conditioning Discs with Mandrel for Cleaning Metal and Quickly Removing Rust and Paint 30Pcs: Amazon.com: Tools & Home Improvement

These follow the curve some on blade faces,

120 Grit Flapwheel - 503 from DREMEL | Acme Tools

Thnx I'll check this out.

 

[shoboat]

Alan,

You can get 3M EXL unitized wheels in 1/2” on up to 14” or larger.
2-S-Fine work well for me. I use a foot switch on my variable speed
Foredom flex shaft, with about five different handpieces like the dentists and jewelers use. Awesome set up !!!

Mark Sholund

 

[Buckshot]

Are they very flexible, how much are they for box of say medium grit & the mandrel cost

Yes flexible. Don’t remember what I paid for them. Look on Amazon.

 

[Mike Byer]

Alan, I can toss a hand full of them in a small usps box if you will cover the postage $9 something last I looked.

 

[Alan Elzer]

Thanks Mike, what's your ppl address. I gave my address in earlier message.

 

[Alan Elzer]

I want to thank everyone for the replies, it's been a big help !!!

 

[brad nichols]

Check the Dremal site for E24745A 36 grit to 120 also E511

Brad

 

[Alan Elzer]

Check the Dremal site for E24745A 36 grit to 120 also E511

Brad

Thnx Brad, but I tried these before. To expensive for me, but found what I needed

 

[brad nichols]

They are expensive and don't last very long.

 

[Chris Wood]

I used to use these in combination with the 3m wheels on props.. good place to deal with

http://www.ecmoore.com/dental_frameset.html