WTB OPS .67 (11cc) connecting rod

[DaveHalverson]

I need an OPS .67 connecting rod if anybody has any extras lying around. New would be preferred and it also should have bushings and not roller bearings. You can reply to this thread or a PM is ok too.

Thank you!

 

[Kevin Sheren]

I may have a new RPM rod. I will check and let you know. I believe the 65/67/80 are all the same.

Kevin

 

[eric stockon]

got nitro says they have them

http://www.shop.gotnitroonline.com/OPS-Marine-60-67-80-Connecting-Rod-576510.htm;jsessionid=31A6ABADF12EB07F2478E4B0ED59EB46.m1plqscsfapp03

 

[FloridaScaleBoater]

I may have a new RPM rod. I will check and let you know. I believe the 65/67/80 are all the same.

Kevin

Kevin;

If Dave passes on the RPM rod, I'd like next in line please.

 

[Joe Wiebelhaus]

I may have a new RPM rod. I will check and let you know. I believe the 65/67/80 are all the same.

Kevin

Dave,

personally, get the RPM rod if available, yes the 65/67/80 bushed rods are the same.

 

[normlee]

What is the difference between the bushed and rpm rod please? Im running the needle roller is that the weakest?

 

[WIDEBOY]

Dave

I have them along with piston & sleeves if you wait till tomorrow I will give you what I have for the ops67.

Steve

 

[brad nichols]

The needle one as long as it is steal would be the strongest. OPS originally had a bushed bottom end and just the aluminum top end which would wear out. The RPM rod was bushed at both ends and was stronger. The new OPS parts are bushed at both ends. I would also be interested in the RPM rod and other parts for 67 & 80.

Thanks

Brad

 

[Kevin Sheren]

I have 2 new rods.

1 NEW RPM Rod $60.00 shipped +fees

1 NEW Aeromarine Rod $50.00 shipped +fees

Paypal address is [email protected]

Let me know.

Kevin

 

[DaveHalverson]

Kevin, I just sent you money for the RPM rod... Thanks again!

 

[Kevin Sheren]

It will go out today.

Thanks,

Kevin

 

[eric stockon]

sent u a PM

 

[WIDEBOY]

Brad

Sent you a PM as requested.

Steve

 

[brad nichols]

Got it Steve

Thanks

Brad