Windshields

[Bryan haley]

I'm curious to see what are you guys using to make windshields and process for hydros

 

[doug long]

My daughter made my windshield decals for my sport 40 and 45 roadrunner

 

[Bryan haley]

My daughter made my windshield decals for my sport 40 and 45 roadrunner

I mean the clear plastic windshields like for a 70s or 80s hydro

 

[Rich Jones]

RC Boat Company sells a lexan windshield that’s molded to the inside of a cowl for the modern boats. You may check with Bill Brandt at Rattlesnake RC as well. Just Google them they come right up. You could get some thin lexan and put it down inside the cowl and carefully take a heat gun to try to mold it a little bit as well.

 

[Mike Hughes]

Clear lexan attached with small fasteners.

 

[Glenn Gates]

Mike nailed it. Lexan is way better than plastic for numerous reasons. I used to buy stainless button head hardware from microfasteners.com. You can buy smaller than 2-56 with nuts and tiny Allen wrenches. A paper template saves on Lexan. E-bay has thin sheets. I think I used 1MM. Put the first fastener in the center and work outward..
Good luck,
Glenn