WHIPLASH SPORT 20

[TERMINATOR]

i am selling some stuff off here to fund other projects and decided to sell my new whiplash, i have ran it a few times and really honestly i do not like it that much, i am really getting into the riggers and i like my tunnels so i decided to sell this one. if i cant get the pic to load it is visible in my album, and it is really nic, has a custom carbon cowl made by yours truly, and a carbon radio box lid, and a neat servo tray in the box that allows the servos to be removed as a unit, the boat has a ed ritchie stainless tank and all speedmaster hardware, also has a third channel needle mount setup for one of don ferrette's fine needle bases. boat was wicked fast with valvola power and a squarewave pipe, and a chris wood 1440, all of which are not included, i can sel it as a setup with the servos or bare hull and hardware, asking price is 400.00 shipped for the hull and all harware, cable strut , rudder, mounts , and whatever else i have for it, no running gear, that price is shipped anywhere in the 48 states, if you feel that is too high well then by all means make me a fair offer, this boat has had maybe 6 tanks of fuel through it , thanks

terry

 

[Chris Wood]

i want that prop back lol!!!

terry is straight and got good stuff.. not junk

chris

 

[csmatheng]

Term,

Is this the Rockstar boat you were running in Mendota? If so, do you have a good pic of the inside of the hull. I may be interested for the complete setup less the Valvola, pipe, and prop. Does the $400 price you quoted include all the hardware, etc. or was that hull only?

Thanks,

Mike

i am selling some stuff off here to fund other projects and decided to sell my new whiplash, i have ran it a few times and really honestly i do not like it that much, i am really getting into the riggers and i like my tunnels so i decided to sell this one. if i cant get the pic to load it is visible in my album, and it is really nic, has a custom carbon cowl made by yours truly, and a carbon radio box lid, and a neat servo tray in the box that allows the servos to be removed as a unit, the boat has a ed ritchie stainless tank and all speedmaster hardware, also has a third channel needle mount setup for one of don ferrette's fine needle bases. boat was wicked fast with valvola power and a squarewave pipe, and a chris wood 1440, all of which are not included, i can sel it as a setup with the servos or bare hull and hardware, asking price is 400.00 shipped for the hull and all harware, cable strut , rudder, mounts , and whatever else i have for it, no running gear, that price is shipped anywhere in the 48 states, if you feel that is too high well then by all means make me a fair offer, this boat has had maybe 6 tanks of fuel through it , thanks
terry

 

[TERMINATOR]

Term,
Is this the Rockstar boat you were running in Mendota? If so, do you have a good pic of the inside of the hull. I may be interested for the complete setup less the Valvola, pipe, and prop. Does the $400 price you quoted include all the hardware, etc. or was that hull only?

Thanks,

Mike

i am selling some stuff off here to fund other projects and decided to sell my new whiplash, i have ran it a few times and really honestly i do not like it that much, i am really getting into the riggers and i like my tunnels so i decided to sell this one. if i cant get the pic to load it is visible in my album, and it is really nic, has a custom carbon cowl made by yours truly, and a carbon radio box lid, and a neat servo tray in the box that allows the servos to be removed as a unit, the boat has a ed ritchie stainless tank and all speedmaster hardware, also has a third channel needle mount setup for one of don ferrette's fine needle bases. boat was wicked fast with valvola power and a squarewave pipe, and a chris wood 1440, all of which are not included, i can sel it as a setup with the servos or bare hull and hardware, asking price is 400.00 shipped for the hull and all harware, cable strut , rudder, mounts , and whatever else i have for it, no running gear, that price is shipped anywhere in the 48 states, if you feel that is too high well then by all means make me a fair offer, this boat has had maybe 6 tanks of fuel through it , thanks
terry

it is the boat i ran in mendota , and it includes the hardware , just no running gear, or servos. let me know and we will make it happen, thanks

and send me a email and ill have a pic for you, if i can find it, thanks

terry

 

[csmatheng]

I am not too concerned about the running gear really anyway so that's cool. I will get that email out to you for the pic. Thanks.

Mike

Term,
Is this the Rockstar boat you were running in Mendota? If so, do you have a good pic of the inside of the hull. I may be interested for the complete setup less the Valvola, pipe, and prop. Does the $400 price you quoted include all the hardware, etc. or was that hull only?

Thanks,

Mike

i am selling some stuff off here to fund other projects and decided to sell my new whiplash, i have ran it a few times and really honestly i do not like it that much, i am really getting into the riggers and i like my tunnels so i decided to sell this one. if i cant get the pic to load it is visible in my album, and it is really nic, has a custom carbon cowl made by yours truly, and a carbon radio box lid, and a neat servo tray in the box that allows the servos to be removed as a unit, the boat has a ed ritchie stainless tank and all speedmaster hardware, also has a third channel needle mount setup for one of don ferrette's fine needle bases. boat was wicked fast with valvola power and a squarewave pipe, and a chris wood 1440, all of which are not included, i can sel it as a setup with the servos or bare hull and hardware, asking price is 400.00 shipped for the hull and all harware, cable strut , rudder, mounts , and whatever else i have for it, no running gear, that price is shipped anywhere in the 48 states, if you feel that is too high well then by all means make me a fair offer, this boat has had maybe 6 tanks of fuel through it , thanks
terry

it is the boat i ran in mendota , and it includes the hardware , just no running gear, or servos. let me know and we will make it happen, thanks

and send me a email and ill have a pic for you, if i can find it, thanks

terry

 

[Beef]

i am selling some stuff off here to fund other projects and decided to sell my new whiplash, i have ran it a few times and really honestly i do not like it that much, i am really getting into the riggers and i like my tunnels so i decided to sell this one. if i cant get the pic to load it is visible in my album, and it is really nic, has a custom carbon cowl made by yours truly, and a carbon radio box lid, and a neat servo tray in the box that allows the servos to be removed as a unit, the boat has a ed ritchie stainless tank and all speedmaster hardware, also has a third channel needle mount setup for one of don ferrette's fine needle bases. boat was wicked fast with valvola power and a squarewave pipe, and a chris wood 1440, all of which are not included, i can sel it as a setup with the servos or bare hull and hardware, asking price is 400.00 shipped for the hull and all harware, cable strut , rudder, mounts , and whatever else i have for it, no running gear, that price is shipped anywhere in the 48 states, if you feel that is too high well then by all means make me a fair offer, this boat has had maybe 6 tanks of fuel through it , thanks
terry

This is a nice boat Terry has for sale, I was gonna buy it I have another more important to buy here shortly. I've seen pics of it and it is done with great detail.

Keith

 

[TERMINATOR]

i am selling some stuff off here to fund other projects and decided to sell my new whiplash, i have ran it a few times and really honestly i do not like it that much, i am really getting into the riggers and i like my tunnels so i decided to sell this one. if i cant get the pic to load it is visible in my album, and it is really nic, has a custom carbon cowl made by yours truly, and a carbon radio box lid, and a neat servo tray in the box that allows the servos to be removed as a unit, the boat has a ed ritchie stainless tank and all speedmaster hardware, also has a third channel needle mount setup for one of don ferrette's fine needle bases. boat was wicked fast with valvola power and a squarewave pipe, and a chris wood 1440, all of which are not included, i can sel it as a setup with the servos or bare hull and hardware, asking price is 400.00 shipped for the hull and all harware, cable strut , rudder, mounts , and whatever else i have for it, no running gear, that price is shipped anywhere in the 48 states, if you feel that is too high well then by all means make me a fair offer, this boat has had maybe 6 tanks of fuel through it , thanks
terry

This is a nice boat Terry has for sale, I was gonna buy it I have another more important to buy here shortly. I've seen pics of it and it is done with great detail.

Keith

well i guess this one goes for 350.00 or ill have to use it to keep the wife warm this winter..lol

term