Wanted walbro high and low speed needles

[doug long]

Having clearance issues with the cowl on my gas Ellison outrigger.
The high and low speed needles are to long. Does anyone know i walbro makes shorter needles.
Thanks

 

[Wally Duarte]

The trick with the stock needles / cut them down and grind in a new slot. That’s how a lot of guys gain clearance.

 

[Mike Hughes]

What wally said

 

[Roxyflash]

i have some

 

[john v]

If you cut them too short you cannot use a needle clamp
Keep this in mind when you have the dremel in your hand