Attn: Motor Heads

[Bob Blazer]

Here is some information that you will not find in print anywhere. At least I have not been able to ind it in any specification manual or any technical sheets on the Zenoah motors. On other motors the info is engraved or embossed on the block but not on the Zenoah. So here is some valuable information that might come in handy when setting up your motors. You also have my expressed permission to reprint or copy this valuable information. The firing order on a Zenoah is "1" that's correct "one". Follow me for other additional comments and informative information. You are welcome 'The Dad'.

 

[Mike Hughes]

When using this firing order......do you go clockwise?.......if you are not going the right direction it will be completely out of wack.

 

[RaceMechaniX]

Must be some good Eggnog at the Blazer house today!

 

[john v]

Good info Bob

 

[SayMikey]

Pretty sure The Dad has got into his wife's wine cellar

 

[Greg Ruggles]

Here is some information that you will not find in print anywhere. At least I have not been able to ind it in any specification manual or any technical sheets on the Zenoah motors. On other motors the info is engraved or embossed on the block but not on the Zenoah. So here is some valuable information that might come in handy when setting up your motors. You also have my expressed permission to reprint or copy this valuable information. The firing order on a Zenoah is "1" that's correct "one". Follow me for other additional comments and informative information. You are welcome 'The Dad'.

Do you need to degree the cam???