To all large scale outboarders

Intlwaters

Help Support Intlwaters:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Joern Markset

Well-Known Member
Supporting Member
Vendor
Joined
Oct 25, 2004
Messages
1,149
I would like to know what you all have hanging on your transom.
What kind of lower are you using, pro`s and con`s with this particullar lower.
Are there any need for another lower, or do we have enough with what is currently available?
I know there is mostly gassers, what about large electric and glow engines?
 
Old Style G- Drive from Arrow Shark.
Very similar (if not direct copies) of older Gmorty drives. The machining is super nice, and have no issues with flex cables. After awhile of running the unit did have to be modified to make it more rigid. Too many screw on pieces, too much vibration is a bad combo.

Unfortunately, no longer made

Unfortunately, no longer made.
 
☆ Arian Hendrix custom 1/4 scale outboard on 1/4 scale Synthar.
Pros,
+Great proven geared combo.
+Billet 7075 material used
+No Flex shaft to twist and break.

Cons=
-Regular gear oil changes needed.
-Before first time use, gear lash setup needed.
 
☆ Arian Hendrix custom 1/4 scale outboard on 1/4 scale Synthar.
Pros,
+Great proven geared combo.
+Billet 7075 material used
+No Flex shaft to twist and break.

Cons=
-Regular gear oil changes needed.
-Before first time use, gear lash setup needed.
Care to share a picture of the outboard and lower ?
 
The problem wit the Arian drive is you can only find them second hand because he isn't making them anymore.
 
Back
Top