Scale boat decals

[Matt Fobes]

Now offering (while supply's last) Neptune scale rudder for 1/6 scale and 1/8 scale boats.
Scale appearing and race ready.
*7075 T-6 anodized aluminum
*Blade is 6.25"
*Bracket is 1.25" tall X 2" wide
*Complete assembly extends 3" from transom
*Can be mounted for left hand or right hand control
*Bracket will hold other blades as well

Complete assembly $55.
Bracket only (Complete with bearing block assembly) $39.
Blade only. $25.
$10. Shipping in US only
Paypal friends n family ONLY to [email protected] and include descriptions and address in "notes".
If sending a check make it to Wesley Ellet and send to 443 Circle drive creal springs il 62922

On the rudder assembly can you flip over the control arm and the bracket that bolts to the transom? So the rudder assembly is bolted to the left side of the transom but the control arm is on the right side of the assembly? How big is the bolt pattern on the bracket? Thanks Matt

 

[Wesleys Custom RC]

On the rudder assembly can you flip over the control arm and the bracket that bolts to the transom? So the rudder assembly is bolted to the left side of the transom but the control arm is on the right side of the assembly? How big is the bolt pattern on the bracket? Thanks Matt

Yes. Everything on it is reversible. I will have to get you the bolt spacing later.

 

[John Callahan]

Wes, PP has been sent for 2ea. rudder blades. Please let use know when the single water pickup blades become available. Thanks.

 

[Wesleys Custom RC]

Yes. Everything on it is reversible. I will have to get you the bolt spacing later.

1 11/16" wide and 7/8" tall

 

[Matt Fobes]

1 11/16" wide and 7/8" tall

Thank you. Also I looked on your website about decals for scale boats. But can you make other decals that aren't on your website? I would like to get some in the future if you can make them.

 

[John Callahan]

Wes, I received the two rudder blades I ordered but both blades were missing the brass water fittings. Was this a packaging error or are water fittings an extra cost on top of the $25.00ea.? Please advise.

 

[Wesleys Custom RC]

Wes, I received the two rudder blades I ordered but both blades were missing the brass water fittings. Was this a packaging error or are water fittings an extra cost on top of the $25.00ea.? Please advise.

Not sure how that happened. Send your address again and I'll get them out.

 

[John Callahan]

Wes, I sent u a PM with my address.

 

[Wesleys Custom RC]

Now offering (while supply's last) Neptune scale rudder for 1/6 scale and 1/8 scale boats.
Scale appearing and race ready.
*7075 T-6 anodized aluminum
*Blade is 6.25"
*Bracket is 1.25" tall X 2" wide
*Complete assembly extends 3" from transom
*Can be mounted for left hand or right hand control
*Bracket will hold other blades as well

Complete assembly $55.
Bracket only (Complete with bearing block assembly) $39.
Blade only. $25.
$10. Shipping in US only
Paypal friends n family ONLY to [email protected] and include descriptions and address in "notes".
If sending a check make it to Wesley Ellet and send to 443 Circle drive creal springs il 62922

I finally got in single pickup rudder blades for the scale rudders as well as other items in stock that I will post soon. FOR YOOUR PATIENCE THERE IS A 10% DISCOUNT ON ALL BLADES TILL THE END OF THE MONTH! Give me a hollar with quantity and address and I will get you pricing.

 

[frankpulte]

Hi Wes, I would like 2 of the single pickup blades for the 1/8 scale.
Thanks Frank

 

[Wesleys Custom RC]

Hi Wes, I would like 2 of the single pickup blades for the 1/8 scale.
Thanks Frank

Thanks, total is $99. Plus $10. Shipping. PayPal fnf to [email protected] or send check and we will get them shipped out, thanks. Be sure to include your address, thanks.

 

[frankpulte]

Hi Wes, money sent. Thanks Frank

Thanks, total is $99. Plus $10. Shipping. PayPal fnf to [email protected] or send check and we will get them shipped out, thanks. Be sure to include your address, thanks.

 

[Wesleys Custom RC]

Shipped