Scale boat decals

Intlwaters

Help Support Intlwaters:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Now offering (while supply's last) Neptune scale rudder for 1/6 scale and 1/8 scale boats.
Scale appearing and race ready.
*7075 T-6 anodized aluminum
*Blade is 6.25"
*Bracket is 1.25" tall X 2" wide
*Complete assembly extends 3" from transom
*Can be mounted for left hand or right hand control
*Bracket will hold other blades as well

Complete assembly $55.
Bracket only (Complete with bearing block assembly) $39.
Blade only. $25.
$10. Shipping in US only
Paypal friends n family ONLY to [email protected] and include descriptions and address in "notes".
If sending a check make it to Wesley Ellet and send to 443 Circle drive creal springs il 62922
On the rudder assembly can you flip over the control arm and the bracket that bolts to the transom? So the rudder assembly is bolted to the left side of the transom but the control arm is on the right side of the assembly? How big is the bolt pattern on the bracket? Thanks Matt
 
On the rudder assembly can you flip over the control arm and the bracket that bolts to the transom? So the rudder assembly is bolted to the left side of the transom but the control arm is on the right side of the assembly? How big is the bolt pattern on the bracket? Thanks Matt
Yes. Everything on it is reversible. I will have to get you the bolt spacing later.
 
Wes, I received the two rudder blades I ordered but both blades were missing the brass water fittings. Was this a packaging error or are water fittings an extra cost on top of the $25.00ea.? Please advise.
 
Back
Top