Sold OPS 60-65 parts

[Dave Petrich]

OPS 60-65 parts, except carb.
Make an offer!

 

[Wasted wages]

I've never seen a .67 with that type of cooling ring on it.. are you sure it's not a .60 or .65 ops gold head ?

Did someone modify the case to fit that ring on it ?

Can you post a picture of the crank and sleeve?

 

[Dave Petrich]

Frank, it seems you know more about this engine than I do. It has a gold 'finned' head. So it could be a .60 or .65. I made a guess. I think I better update the description. I'll get a picture of the crank and sleeve.

 

[Wasted wages]

I have a NIB .65 gold head... I'll see if I can post up a picture...I can't remember if it has that same cooling ring on it..

 

[Dave Petrich]

the insides...

 

[Wasted wages]

I'm pretty sure what you have there is a .65 OPS
With a steel flywheel and some other manufacturers drum rotor... I don't think OPS ever made a drum rotor .65.
This is a box stock OPS .65...

 

[Wasted wages]

What's the carb side of the rotor housing look like ?

 

[Dave Petrich]

What's the carb side of the rotor housing look like ?

The back plate/drum rotor fits but doesn't look like a perfect match. Could it be a Picco drum? This is looking more like a bag of parts.

 

[ChrisHerzog]

That’s a really old OPS 65. Frank, a 67 P/S will drop right in. Those engines ran ok but they put heavy flywheels on them because the crank was not balanced. They only made a 65 with a cooling ring. The 60’s had a water cool head as does the 67’s.
This is a pic of an engine that I run in my scale boat currently. It’s a 65 case with the water cooled jacket, a 67 P/S, 67 crank (balanced) , 67 flywheel and 67/80 water cooled head. I was having a heating problem in my scale so instead of chopping the cowl up, I use both the water cooled case and head. Runs awesome!

 

[Wasted wages]

Thanks Chris, that's a good idea for an enclosed scale motor. I still need to build a motor for my Scale, so this case might work..

I'm not going to part out a NIB .65 just for the case.
My .65 pictured above confirms the case for sale is in fact a .65 case.

As far as the other parts and condition it's a crapshoot... I'm not really sure what the rotor housing is... may be a picco ?

Dave, I have no idea what to offer for this, give me an idea of what you are needing for it..

 

[Mark Daniels Jr]

Thanks Chris, that's a good idea for an enclosed scale motor. I still need to build a motor for my Scale, so this case might work..

I'm not going to part out a NIB .65 just for the case.
My .65 pictured above confirms the case for sale is in fact a .65 case.

As far as the other parts and condition it's a crapshoot... I'm not really sure what the rotor housing is... may be a picco ?

Dave, I have no idea what to offer for this, give me an idea of what you are needing for it..

I think I may have a 65 case, I can check the box

 

[MarkDanielsSr]

Also a really unique look when you cut the ring off, I have a pair for one of the twins, .67 internals with cut off ring 65 cases and polished 67 water cooled heads. They definitely draw double takes.

 

[Mark Daniels Jr]

I believe it is a Rossi drum, they have to be shimmed to run, maybe interest in group lot

 

[Timbo Whalen]

I have a NIB .65 gold head... I'll see if I can post up a picture...I can't remember if it has that same cooling ring on it..

Appears to be a Picco cooling jacket.

 

[Wasted wages]

Appears to be a Picco cooling jacket.

I thought the same thing at first Tim, would sure be a mixed bag of parts !!

 

[Wasted wages]

I believe it is a Rossi drum, they have to be shimmed to run, maybe interest in group lot

You might be right on the drum,,, I have never seen a carb mounting surface like that before, but then again, I've never owned a Rossi....

 

[Wasted wages]

I think I may have a 65 case, I can check the box

Please do, if you have a .65 block you can part with, and want to pick up this Frankenmotor for the drum, I'll pass on it.
Or I can buy this pile, and send you the drum...

Either way works for me...Just waiting for Dave to reply with his expectations...

 

[Dave Petrich]

Thanks Chris, that's a good idea for an enclosed scale motor. I still need to build a motor for my Scale, so this case might work..

I'm not going to part out a NIB .65 just for the case.
My .65 pictured above confirms the case for sale is in fact a .65 case.

As far as the other parts and condition it's a crapshoot... I'm not really sure what the rotor housing is... may be a picco ?

Dave, I have no idea what to offer for this, give me an idea of what you are needing for it..

$5 and shipping is fine. I just don't want to toss it out if someone can use these parts.

 

[Wasted wages]

Sold!

How's 20 bucks total sound to cover shipping as well ? Do you still have my address ?

 

[Dave Petrich]

Sold!

How's 20 bucks total sound to cover shipping as well ? Do you still have my address ?

Agreed. I do have your address. I'll get it out soon.