Novarossi of America

[larcor69]

Hi, Glenn, another question for ya, I have a nova P5X buggy engine with a jim Hotts mod., was wondering if these water cooled head's would work on my P5X also can I get a flywheel made to work with a modded SG shaft??, Thanks..Corey

 

[Glenn Quarles]

Hi, Glenn, another question for ya, I have a nova P5X buggy engine with a jim Hotts mod., was wondering if these water cooled head's would work on my P5X also can I get a flywheel made to work with a modded SG shaft??, Thanks..Corey

Corey, I'm not sure exactly what a P5X head is like, but I'm pretty sure we can put something together. Yes I will be happy to mod a flywheel for your SG shaft. Send me a PM and we can talk details.

Glenn

 

[larcor69]

here's the pic's of my Novarossi buggy engine's I want to turn into marine, also check your PM folder..Corey

 

[AndyBrown]

Hi, Glenn, another question for ya, I have a nova P5X buggy engine with a jim Hotts mod., was wondering if these water cooled head's would work on my P5X also can I get a flywheel made to work with a modded SG shaft??, Thanks..Corey

Corey, I'm not sure exactly what a P5X head is like, but I'm pretty sure we can put something together. Yes I will be happy to mod a flywheel for your SG shaft. Send me a PM and we can talk details.

Glenn

Glenn,

The car heads are flat like the unit Frank Orlic makes. His water jacket will most likely fit. We still have a bunch of the same style waterjackets in stock remaining from our pre MAC days.

I should probably just send them all to you.

The P5X car crankcase is the same as the higher priced Nova marine engines.

 

[larcor69]

how much for one of those heads, Andy??

 

[Ben Daigle]

Glenn, (or anyone else that knows) is this the engine you guys are talking about? If so, what's the avalibility of the engines and parts?

I got this info. from your website.

Engine T 35 PLUS 21 MS2

Displacement 3,49cc

Max. power 2,87 hp

R.P.M (Max. power) 38.200 R.P.M.

Practical range 6.000 ~ 45.800 R.P.M.

Bore x stroke 16,26mm x 16,80mm

Sleeve N. Transfer ports N. 9

Code 08556T

Rear Ball Bearing Balls type Steel

Code 16800

Starting

Crankshaft Type 14mm - TURBO STD

Code 85012

Carburetor Type 9,0mm - Rotary

Material Aluminium

Adjustment Double

Code 75013

Glowplug type - Code Turbo - C6TF

Exhaust position Rear

Thanks

 

[AndyBrown]

how much for one of those heads, Andy??

$19

 

[Glenn Quarles]

Glenn, (or anyone else that knows) is this the engine you guys are talking about? If so, what's the avalibility of the engines and parts?
I got this info. from your website.

Engine T 35 PLUS 21 MS2

Displacement 3,49cc

Max. power 2,87 hp

R.P.M (Max. power) 38.200 R.P.M.

Practical range 6.000 ~ 45.800 R.P.M.

Bore x stroke 16,26mm x 16,80mm

Sleeve N. Transfer ports N. 9

Code 08556T

Rear Ball Bearing Balls type Steel

Code 16800

Starting

Crankshaft Type 14mm - TURBO STD

Code 85012

Carburetor Type 9,0mm - Rotary

Material Aluminium

Adjustment Double

Code 75013

Glowplug type - Code Turbo - C6TF

Exhaust position Rear

Thanks

Ben yes the 35Plus is one of the engines we are talking about, but it is not the $250 engine. The 35Plus is the top of the line Novarossi marine engine and I sell them for $395. Yes I keep engines and all parts in stock. The only difference in my engines from the specs you listed above is my engines come set up for standard plugs, but I do have turbo plug heads in stock if you would like that instead.

Glenn

 

[Bob Morton]

Glenn, (or anyone else that knows) is this the engine you guys are talking about? If so, what's the avalibility of the engines and parts?
I got this info. from your website.

Engine T 35 PLUS 21 MS2

Displacement 3,49cc

Max. power 2,87 hp

R.P.M (Max. power) 38.200 R.P.M.

Practical range 6.000 ~ 45.800 R.P.M.

Bore x stroke 16,26mm x 16,80mm

Sleeve N. Transfer ports N. 9

Code 08556T

Rear Ball Bearing Balls type Steel

Code 16800

Starting

Crankshaft Type 14mm - TURBO STD

Code 85012

Carburetor Type 9,0mm - Rotary

Material Aluminium

Adjustment Double

Code 75013

Glowplug type - Code Turbo - C6TF

Exhaust position Rear

Thanks

Ben yes the 35Plus is one of the engines we are talking about, but it is not the $250 engine. The 35Plus is the top of the line Novarossi marine engine and I sell them for $395. Yes I keep engines and all parts in stock. The only difference in my engines from the specs you listed above is my engines come set up for standard plugs, but I do have turbo plug heads in stock if you would like that instead.

Glenn

I saw both of these engines run this weekend at the Norterh Nats I was pitting for Ron Jefferson.His twenty mono ran great and his twenty hydro realy ran great. Ron always makes his stuff go

Bob Morton

 

[taber]

Glen . how do the short strokes compare in performance to the newer long strokes,and can I still get parts for the short strokes?

 

[Glenn Quarles]

Glen . how do the short strokes compare in performance to the newer long strokes,and can I still get parts for the short strokes?

A good SS will run with a good LS.

I have many of the parts for a SS, but there are some that are no longer available...cases, piston/sleeves (I have new pistons for sale), crankshafts. If you have a good SS then make sure you keep good bearings in it (change them BEFORE they wear out and you can make the case last forever), use a good quality fuel, and be easy on squeezing the needle and it should continue to run for a long time.

Give me a call if you ever need anything for it.

Glenn

 

[TERMINATOR]

Glen . how do the short strokes compare in performance to the newer long strokes,and can I still get parts for the short strokes?

A good SS will run with a good LS.

I have many of the parts for a SS, but there are some that are no longer available...cases, piston/sleeves (I have new pistons for sale), crankshafts. If you have a good SS then make sure you keep good bearings in it (change them BEFORE they wear out and you can make the case last forever), use a good quality fuel, and be easy on squeezing the needle and it should continue to run for a long time.

Give me a call if you ever need anything for it.

Glenn

two questions glenn, how in the world do i get the collewt into the flywheel on my 12 i got from you, i have no collets that will fit down into the hole that is machined in the center.. and question 2 is do you still have any of the 12's left at the special price, i need 2 more please, and the new carbs.. let me know , thanks

terry

 

[Glenn Quarles]

Glen . how do the short strokes compare in performance to the newer long strokes,and can I still get parts for the short strokes?

A good SS will run with a good LS.

I have many of the parts for a SS, but there are some that are no longer available...cases, piston/sleeves (I have new pistons for sale), crankshafts. If you have a good SS then make sure you keep good bearings in it (change them BEFORE they wear out and you can make the case last forever), use a good quality fuel, and be easy on squeezing the needle and it should continue to run for a long time.

Give me a call if you ever need anything for it.

Glenn

two questions glenn, how in the world do i get the collewt into the flywheel on my 12 i got from you, i have no collets that will fit down into the hole that is machined in the center.. and question 2 is do you still have any of the 12's left at the special price, i need 2 more please, and the new carbs.. let me know , thanks

terry

Terry, the answer to the collet question is to buy one of the collets I sell...it has the pilot section that fits rght down in the flywheel. And for only $9.95 it will save you any headache you may be having. I have 3 more .12 motors for $175 ($200 with flywheel). And yes I have the new carbs. PM me with the details if you want the motors.

Glenn

 

[Richard Dahlheimer]

Glen . how do the short strokes compare in performance to the newer long strokes,and can I still get parts for the short strokes?

A good SS will run with a good LS.

I have many of the parts for a SS, but there are some that are no longer available...cases, piston/sleeves (I have new pistons for sale), crankshafts. If you have a good SS then make sure you keep good bearings in it (change them BEFORE they wear out and you can make the case last forever), use a good quality fuel, and be easy on squeezing the needle and it should continue to run for a long time.

Give me a call if you ever need anything for it.

Glenn

two questions glenn, how in the world do i get the collewt into the flywheel on my 12 i got from you, i have no collets that will fit down into the hole that is machined in the center.. and question 2 is do you still have any of the 12's left at the special price, i need 2 more please, and the new carbs.. let me know , thanks

terry

Terry, the answer to the collet question is to buy one of the collets I sell...it has the pilot section that fits rght down in the flywheel. And for only $9.95 it will save you any headache you may be having. I have 3 more .12 motors for $175 ($200 with flywheel). And yes I have the new carbs. PM me with the details if you want the motors.

Glenn

Glenn, could you please give the rear bearing number for the Nova .28 engine? Thank You, Richard D

 

[Glenn Quarles]

Glen . how do the short strokes compare in performance to the newer long strokes,and can I still get parts for the short strokes?

A good SS will run with a good LS.

I have many of the parts for a SS, but there are some that are no longer available...cases, piston/sleeves (I have new pistons for sale), crankshafts. If you have a good SS then make sure you keep good bearings in it (change them BEFORE they wear out and you can make the case last forever), use a good quality fuel, and be easy on squeezing the needle and it should continue to run for a long time.

Give me a call if you ever need anything for it.

Glenn

two questions glenn, how in the world do i get the collewt into the flywheel on my 12 i got from you, i have no collets that will fit down into the hole that is machined in the center.. and question 2 is do you still have any of the 12's left at the special price, i need 2 more please, and the new carbs.. let me know , thanks

terry

Terry, the answer to the collet question is to buy one of the collets I sell...it has the pilot section that fits rght down in the flywheel. And for only $9.95 it will save you any headache you may be having. I have 3 more .12 motors for $175 ($200 with flywheel). And yes I have the new carbs. PM me with the details if you want the motors.

Glenn

Glenn, could you please give the rear bearing number for the Nova .28 engine? Thank You, Richard D

Richard, it is 16800. I have them in stock.

Do you have a .28? I got one to play with in my last order...I haven't had the chance to run it yet, but it looks really good!

Glenn

 

[nitrotwin]

HOW MUCH FOR A NEW 21 SS PISTON???? Need about three of them THANKS JWB

 

[Richard Dahlheimer]

HOW MUCH FOR A NEW 21 SS PISTON????THANKS JWB

Glenn, no i do not have a .28 Nova. Just wanted to find out what rear bearing is used. Thanks again, Richard

 

[Glenn Quarles]

HOW MUCH FOR A NEW 21 SS PISTON???? Need about three of them THANKS JWB

JWB, the pistons are $36 each (plus shipping).

Glenn

 

[JOE P.]

Hey guys, my latest order just arrived with 35Plus21's, lots of parts, and the new 5 port engines that I am selling for $250.
These new 5 port motors are very nice! They share many of the same parts as the much more expensive motors and should run almost as good right out of the box as the others. I only have a few of them and I expect them to be gone very soon, so if you want one give me a call.

Glenn

Hi Glen, I would like to order a 5 port .21. Do you have any motors ready to ship?

Will my header from my old short stroke nova fit this motor? what about pipe selection /recommendations..THANKS! Joe P.

 

[Glenn Quarles]

Hey guys, my latest order just arrived with 35Plus21's, lots of parts, and the new 5 port engines that I am selling for $250.
These new 5 port motors are very nice! They share many of the same parts as the much more expensive motors and should run almost as good right out of the box as the others. I only have a few of them and I expect them to be gone very soon, so if you want one give me a call.

Glenn

Hi Glen, I would like to order a 5 port .21. Do you have any motors ready to ship?

Will my header from my old short stroke nova fit this motor? what about pipe selection /recommendations..THANKS! Joe P.

Joe, I am sorry, but I am out of the 5 port motors right now (my last order lasted 10 days). I will have more on order soon and hope to have them here within a month. I do have the 35Plus engines in stock.

Yes your old header will fit. Pipe selection will vary depending on your boat. If you are running it in a mono I always recommend the black Novarossi pipe. If you are running a hydro I would recommend one of the Andy Brown pipes (I have those in stock) or the OPS 3280.

Thank you,

Glenn