New JAE "Twin .45" plans

[Geraghty]

THe JAE design team has just released a new set of JAE "Twin" .45 plans for consumption by model boaters......

With very little imagination this newest release would also make a very good FE boat for certain applications.....

The plans are available for downloading at the link shown below ......

http://ne-stuff.blogspot.com/

 

[RodneyPierce]

Looks really good Rod! I like the boom through the turn fin!

 

[gil sonsino]

with a pair of new Nova's...........she will be faaasssttttt!

 

[ALLAN YUEN]

Nice Be Cool Is David Hall still build new project 45 twin this year?

 

[Mike Hallam]

David Hall started work on the plans over 2 months ago and we discussed quite a few of the details for a 45 twin. He released the plans in auto cad to me about 4 weeks ago. I'm working away at it and will post pictures of the build soon. Sure had to squeeze the engines in as the tub is a bit less than 4 3/4" wide inside. Lots or work to do with the custom motor mounts. Going to have 2 Picco 45 engines in it. Thanks to David for including a lot of the instructions right on the plans.

 

[Geraghty]

David Hall started work on the plans over 2 months ago and we discussed quite a few of the details for a 45 twin. He released the plans in auto cad to me about 4 weeks ago. I'm working away at it and will post pictures of the build soon. Sure had to squeeze the engines in as the tub is a bit less than 4 3/4" wide inside. Lots or work to do with the custom motor mounts. Going to have 2 Picco 45 engines in it. Thanks to David for including a lot of the instructions right on the plans.

Adjusting the width of the tub 1/2" either way to accomodate different motors should be no problem to the performance of the boat......

 

[Joe Warren]

Rod is Joe at Zipp building these yet? Cool Boat

 

[twox45]

Rod is Joe at Zipp building these yet? Cool Boat

Thanks Joe, I am sure if enough people show an interest he would build a short kit. Narrow the tub about an inch and it would work really well with a high RPM 80 size motor.

 

[Joe Warren]

Well I`m thinking TWIN 45`ssssssssssssssssssssssssssssss with some 1657`s 4.8 cup. Now if they had not screwed up the F hydro class with the singles only?? We would have a place to Race it!!!!!!!

 

[Andy Brown]

4 3/4" wide tub. Where will the rudder be placed?

 

[John Knight]

Well I`m thinking TWIN 45`ssssssssssssssssssssssssssssss with some 1657`s 4.8 cup. Now if they had not screwed up the F hydro class with the singles only?? We would have a place to Race it!!!!!!!

Joe,

We have NOT screwed up the F Hydro class with the singles only. What has been done is an option for clubs to ADD another F Hydro class, even if it is a single engine class. It does not take away from the traditional F Hydro class. If anything, it is increasing the nitro big block class racing. And it has, just look at the numbers entering the Fall Nationals and the Winternationals. That makes 3 F Hydro and twin classes and it does not get much better than that! Don't bash it, embrace it!

 

[Joe Warren]

John the Winter nats was X - Hydro SINGLES ONLY.... What are you talking about?? They did not add anything. Now your lake or club may have added a extra class!!!......I`am all for Adding F Classes........ Just Not everyone does that... Most clubs just modify the existing Class in the Program......... We need a class to race Twin Hydro 45`s & 67`s in.... Especially if someone is going to built the boats!!!

 

[JeremyEdge]

The winternats was ran under NAMBA rules. I like the IMPBA f class displacement limit.

 

[JeremyEdge]

Joe are you going to Hobart this year?

 

[Joe Warren]

Anything is possible. if Work is not too demanding in that time frame I could be there. August is normally Stupid busy and most of the time it runs over into Sept.

 

[Joe Warren]

The winternats was ran under NAMBA rules. I like the IMPBA f class displacement limit.

Jeremy, John was under the impression that they added a Class for F or X Single Hydros. They Just modified the existing class within the NAMBA race program. Singles And Twins have mixed it up for years... Most Boaters like the extra Challenge

 

[Joe Warren]

4 3/4" wide tub. Where will the rudder be placed?

Well I agree, Unless the pic is deceiving. This thing is Now Hauling ars... And we dont have a rudder... :blink:

 

[mtruex]

4 3/4" wide tub. Where will the rudder be placed?

Well I agree, Unless the pic is deceiving. This thing is Now Hauling ars... And we dont have a rudder... :blink:

in the center

 

[Blackout]

Are there any photos of the prototype JAE 45 twin?

 

[Andy Brown]

4 3/4" wide tub. Where will the rudder be placed?

Well I agree, Unless the pic is deceiving. This thing is Now Hauling ars... And we dont have a rudder... :blink:

in the center

Behind the props?