need prop info for a k&b 3.5

[mark holton jr]

what are a few good props for a k&b 3.5.its bone stock and going on a ts2. thanks guys

 

[Martin Meijer]

A octura 1440 back cut,fast prop.

martin

 

[Jerry Dunlap]

M440 or X440 balanced and sharpened would work well. Unless you have experience reworking a 1440, the M and X 440s are good props.

JD

 

[mark holton jr]

ok thanks guys

 

[chunk t]

+1 on the X440, I think it's a little more forgiving if your set-up and needle aren't dead on.

 

[HTV JAY]

I agree with Jerry M440 and X440 should work well. Might also want to consider Grim Racer 40x53, and 40x52/3. http://www.aquacraftmodels.com/accessories/propellers.html .

If you need prop work Mark Sholund’s absolutely one of the best. http://www.props4u.com/ .

You cannot go wrong trying different props, I’d start here and try everyone. The right prop and motor combination is everything.

If you need help with a K&B I'd contact Geraghty.

Jay Halbrehder

 

[Grimracer]

Thanks Jay for the plug.. I agree.. try the props Jay called out!

Grimracer

 

[mark holton jr]

whats the diference between the m440 and x440

 

[shoboat]

Mark,

Blade area ratio mainly.

A little less cup on the trailing edge of the X-440.

Less blade area on the M-440.

Mark Sholund

 

[mark holton jr]

got ya thanks mark