Grommets in the JAE engine mount

[anthony_marquart]

Anyone know what these are or where they came from?

 

[longballlumber]

I would take a look at these Anthony...

http://www.mcmaster.com/#rubber-grommets/=9rctr1

Later,

Mike

 

[hydro rob]

hilman k4 grommets 7/16 od 3/16 id thats the last set i got.

 

[anthony_marquart]

[

Got a link or anything so I can buy them?

quote name=hydro rob' timestamp='1290144527' post='386664]

hilman k4 grommets 7/16 od 3/16 id thats the last set i got.

 

[Paul Traufler]

How about here:

McMaster Carr

These folks ROCK! I went with the high temp as they made out of silicone and will withstand nitro better. Same durometer hardness (50A) so they are kiind of soft.

Paul

 

[hydro rob]

How about here:

McMaster Carr

These folks ROCK! I went with the high temp as they made out of silicone and will withstand nitro better. Same durometer hardness (50A) so they are kiind of soft.

Paul

Paul, which exact ones did you get from mcmaster? there are many sizes of the ones we use. I guess I could go pull mine out and re measuer but could you let us know?

The ones o got are from lowes.

 

[Geraghty]

How about here:

McMaster Carr

These folks ROCK! I went with the high temp as they made out of silicone and will withstand nitro better. Same durometer hardness (50A) so they are kiind of soft.

Paul

Paul, which exact ones did you get from mcmaster? there are many sizes of the ones we use. I guess I could go pull mine out and re measuer but could you let us know?

The ones o got are from lowes.

These are the MSC grommets we used in the motor mounts.........getting the silicone grommets of this same size is a good idea.......they are a lot more rugged than the buna-n grommets we used.

PART # 32829061

 

[Paul Traufler]

As Rod siad the silicone ones would be better, this is what I got:

McMaster Carr

Paul

 

[hydro rob]

just ordered a bag of the silicone ones. We shall see when they get here. thanks