First rigger to build for impba p (4s) or Q(6s)

[Eriel Garrastegui]

Hey guys what's a good maker for a first time racing rigger is the R4 from zipkits worth it? Any suggestions folks

 

[Jeff Barnes]

Blazermarine rigger

 

[Ron Zaker Jr]

Hey guys what's a good maker for a first time racing rigger is the R4 from zipkits worth it? Any suggestions folks

R 4 from Zipp runs really well in traffic.

 

[Eriel Garrastegui]

R 4 from Zipp runs really well in traffic.

I was kind of sort of thinking that

 

[Dave Gilles]

r4 is for P limited only. 33FE is larger, handles chop little better. can take full P motor.

 

[LohringMiller]

The NextGen rigger has been dominating P electric racing the last few years. Contact Mark Grimm for information.

Lohring Miller

 

[RaceMechaniX]

I believe Mark is taking a small hiatus from cutting NexGen kits.

 

[RaceMechaniX]

This is the NexGen EP-1 P and P-ltd rigger: https://www.intlwaters.com/threads/nexgen-ep1-p-hydro.82427/

 

[Mark Anderson]

I don't know if IMPBA has the same stupid max size rules that NAMBA has, but the current 34 inch boats are too small. The R4 is only 30 inches and is built around a 5000mah battery that is too small for a serious P-lmtd let alone full P. Competitive boats are pulling north of 200 amps and running in the mid 70s. If you go Zip, get the bigger boat. If you plan to race, ask here before you buy a power system.

 

[Eriel Garrastegui]

I don't know if IMPBA has the same stupid max size rules that NAMBA has, but the current 34 inch boats are too small. The R4 is only 30 inches and is built around a 5000mah battery that is too small for a serious P-lmtd let alone full P. Competitive boats are pulling north of 200 amps and running in the mid 70s. If you go Zip, get the bigger boat. If you plan to race, ask here before you buy a power system.

I'll come looking for you