TheRealDeal
Active Member
- Joined
- Oct 8, 2007
- Messages
- 39
Need to sell,
boat needs the servo's monted,stuffing tube glued and paint,
This boat is very well built,it is super straight,lite and has super sharp edge's,,,
with everything on the scale,I get 2lb.-11oz.
The sponsons have been primered with 1-Shot block-out white primer
and the intierior of the hull has two coats of clear Aero-Gloss.
I have well over $700 invested in this boat so far,
I would like to get $375 + shipping
Firefighter kit
OS 18tz
OS header
OS alum. flywheel
MAC pipe
Octura .150 coupler
Octura motor mount
Hughey .150x3/16 flex shaft
Solinger strut/rudder
2-props,,,v937(raw) n940(s&b by CMDI)
Grim turn fin
Ofna 5-cell 1700 battery
Hitec servo's 1-hs225mg and 1-hs85mg
Hitec SRX 3ch Radio
and misc.stuff like
switch,seals,rudder link.,ant.,starter belt,ect.
boat needs the servo's monted,stuffing tube glued and paint,
This boat is very well built,it is super straight,lite and has super sharp edge's,,,
with everything on the scale,I get 2lb.-11oz.
The sponsons have been primered with 1-Shot block-out white primer
and the intierior of the hull has two coats of clear Aero-Gloss.
I have well over $700 invested in this boat so far,
I would like to get $375 + shipping
Firefighter kit
OS 18tz
OS header
OS alum. flywheel
MAC pipe
Octura .150 coupler
Octura motor mount
Hughey .150x3/16 flex shaft
Solinger strut/rudder
2-props,,,v937(raw) n940(s&b by CMDI)
Grim turn fin
Ofna 5-cell 1700 battery
Hitec servo's 1-hs225mg and 1-hs85mg
Hitec SRX 3ch Radio
and misc.stuff like
switch,seals,rudder link.,ant.,starter belt,ect.
Last edited by a moderator:
