Engine Bearings

[mercguy]

Mike

I would like a set of #2 and #3 bearings. I don't do PP so is there another way I can pay you?

Bill Hoch 

Stuart, Florida

 

[FloridaScaleBoater]

Mike

I would like a set of #2 and #3 bearings. I don't do PP so is there another way I can pay you?

Bill Hoch 

Stuart, Florida

Are you finally going to run some model boats????

 

[Mike Betke]

Mike

I would like a set of #2 and #3 bearings. I don't do PP so is there another way I can pay you?

Bill Hoch 

Stuart, Florida

Bill, I will send you a PM with details. Check your PM

 

[namba276]

Mike, you have a PM.

thx, Bob

 

[Danny King]

Mike sent you a PM. 

 

[Mike Betke]

Just thought I would pass along some info. I took apart a brand new CMB .67 EVO blue head for somebody this weekend and they are now using the same SKF bearings in the new motor from the factory that I have been selling here. They are also keeping the metal shield on the flywheel side of the bearing like I usually do.

 

[David Bryant]

Just thought I would pass along some info. I took apart a brand new CMB .67 EVO blue head for somebody this weekend and they are now using the same SKF bearings in the new motor from the factory that I have been selling here. They are also keeping the metal shield on the flywheel side of the bearing like I usually do.

so the bearing shield is facing outside?

 

[Mike Betke]

so the bearing shield is facing outside?

Yes, helps keep debris out.

 

[Eric Canto]

Hello Mike. I would like three sets of bearings for the RS 1.01” let me know availability and how to pay. Thanks

 

[Mike Betke]

Hello Mike. I would like three sets of bearings for the RS 1.01” let me know availability and how to pay. Thanks

PM being sent

 

[Rc painter]

PM being sent

 

[Rc painter]

Mike I will take 1 set of #1 and 1 set of #2let me know how much and pp address

 

[MikeMischnick]

Boaters,

Last year I was able to find a supplier to get SKF bearings from at a reasonable price. SKF is a well known supplier of quality bearings. These are Class 3 bearings with the high speed polymer retainer. They are the exact same bearing that comes in a CMB 21 & 45 stock from the factory. I have used them on the 67 and 80 as well with good results. Rob has a season on a set in his scale and they still feel new. Bearings are made in Italy or France, not the cheap Chinese copies. I went on a search to find some quality bearings at a reasonable price after only being able to get a few runs on a set of bearings from a popular bearing source that provides bearings with no manufactures name or class # identified on them and having to throw them out multiple times. These bearings have been a great find for me.

Anyways, I am going to put an order in again and if anybody would like to get some let me know. I was not planning on getting into the bearing business, but would like to pass this savings on to the boating community for those that need some. Here are the bearings that I can get and prices less shipping. (Shipping is usually $5 depending on how many and where it goes)

Set #1 ($25) - 21 size 607 & 6000 bearings. Fits MAC21, CMB Valvola, VAC, Beta, Beta Evo

Set #2 ($30) - 45 size 608 & 6001 bearings. Fits CMB 45 VAC V5, MAC45, Picco Blackhead, AA45, New OPS 45

Set #3 ($30) - 6000 & 6002 bearings. Fits CMB 67 & 80 HR, CMB 90VAC/HR, MAC 67/80

Set #4 ($30) - 609 & 629 bearings. Fits CMB 45 EVO and RS

Set #5 ($35) - Qty 2 6001 bearings. Fits CMB 91 and 101 RS/EVO. (For some reason this bearing is the most expensive of the bunch but not the biggest)

Set #6 ($30) - 6000 bearing & HK1010 needle bearing for older CMB 90EVO

I cannot get bearings for Nova Rossi and Picco 67 bearings. SKF does not offer those sizes in this style of bearing.

Let me know if you would want some. I would like to order in a larger quantity to keep the shipping costs from Europe down.

Thanks,

Mike Betke

Hi Mike,
I will take
(2) sets of #1
(2) sets of #2
Thanks.
Mike Mischnick

 

[Mike Betke]

Hi Mike,
I will take
(2) sets of #1
(2) sets of #2
Thanks.
Mike Mischnick

Mike, I am assuming that this is the same order you e-mailed me about. I am still waiting for the shipment to come in. I expect them by the end of the week. Some bearings were on backorder which caused the delay.

 

[Mike Betke]

Mike I will take 1 set of #1 and 1 set of #2let me know how much and pp address

PM sent

 

[MikeMischnick]

Mike, I am assuming that this is the same order you e-mailed me about. I am still waiting for the shipment to come in. I expect them by the end of the week. Some bearings were on backorder which caused the delay.

Yes it is Mike. Sorry about the time to get back to you.

 

[Mike Betke]

If anyone needs bearings for winter rebuilds, I have a good amount stocked up now.

 

[DeanJohnson]

Hi Mike,
Do you have any for Nova 21's? T21-M style wrap around exhaust type case.

 

[Duke Mordja]

Mike,

I would like to order 4 Sets of #3. (6000/6002) for CMB67's.

Thank You

Duke

 

[Timbo Whalen]

If anyone needs bearings for winter rebuilds, I have a good amount stocked up now.

Mike, do you have anything for NovaRossi's?.....we can give you bearing numbers, if you think you might.

Going to need some bearings for HR's, too, down the road a wee distance. We're in the process of

moving up to TC for a while.

Merry Christmas to You and the Family!

Thanks,

Tim