Christmas is time for giving!

[misshydro]

As BOB Cratchet said to Scrooge, please forgive me sir...as i am behind on my time! im 99% sure i have a Dumas Eagle Sport 40 hydroplane kit somewhere in my shop....it might be missing a coupla pieces of wood, but as i remember its all in good shape...if someone would like to have it, ill take care of shipping...didnt want to miss out on this Andy, i think its a wonderful idea...how bout keepin it goin till New Year for slow pokes like me who are "behind on thier time"? If for some reason this offer falls thru, i PROMISE i will come up with somethin, though im sure that i still have the kit somewhere down in the "cave"!!

boy that eagel is tempting to grab,, been taunted by acoulpe of guys for me to build one or miss unlimted in the past but never had the funds to get one....like to snag it if possible?? I dont have alot to give,most of my stuff are rtr stuff ,,proboat hydro's and miss vegas.. do have two good Jr 270 servos to give away and one flex shat for 1/12& strut assembly to a proboat hydros and one 1/8 scale proboat complete flex shaft with strut assambly from my boyfriends 1/8 proboat hydro..I'll dig threw my R/C stuff today to see what else I can giveaway..

 

[misshydro]

sorry messedup..

 

[Rod Sanata]

Well today i had to put my Grayhound to sleep and to help put me back into the Christmas spirit i going to give away a good used MAC .45 com rod and also a new still in the pack K&B .67 steering arm part #5151.I will also pay shipping.Marry Christmas!!!!

Chris very sorry to hear about your Greyhound, I know how you feel my pets are a huge part of our lives, MERRY CHRISTMAS TO YOU, YOUR FAMILY AND ALL YOU RACERS UP NORTH.

 

[Bob Howard]

Going through some stuff I came up with a K&B red carb without the needle, otherwise it looks like new.

Merry Christmas

Bob

 

[Bill Gibson]

As BOB Cratchet said to Scrooge, please forgive me sir...as i am behind on my time! im 99% sure i have a Dumas Eagle Sport 40 hydroplane kit somewhere in my shop....it might be missing a coupla pieces of wood, but as i remember its all in good shape...if someone would like to have it, ill take care of shipping...didnt want to miss out on this Andy, i think its a wonderful idea...how bout keepin it goin till New Year for slow pokes like me who are "behind on thier time"? If for some reason this offer falls thru, i PROMISE i will come up with somethin, though im sure that i still have the kit somewhere down in the "cave"!!

boy that eagel is tempting to grab,, been taunted by acoulpe of guys for me to build one or miss unlimted in the past but never had the funds to get one....like to snag it if possible?? I dont have alot to give,most of my stuff are rtr stuff ,,proboat hydro's and miss vegas.. do have two good Jr 270 servos to give away and one flex shat for 1/12& strut assembly to a proboat hydros and one 1/8 scale proboat complete flex shaft with strut assambly from my boyfriends 1/8 proboat hydro..I'll dig threw my R/C stuff today to see what else I can giveaway..

Miss Hydro, you might as well show the guys that you can do it! Sooooo....PM me your address and if i still have it (which im sure that i do), ill get it out to you! i doubt you will see it by Christmas, but ill get it out as quick as i can.....i gotta see what other stuff i can scrounge up that somebody might want so.....Merry Christmas!

 

[misshydro]

As BOB Cratchet said to Scrooge, please forgive me sir...as i am behind on my time! im 99% sure i have a Dumas Eagle Sport 40 hydroplane kit somewhere in my shop....it might be missing a coupla pieces of wood, but as i remember its all in good shape...if someone would like to have it, ill take care of shipping...didnt want to miss out on this Andy, i think its a wonderful idea...how bout keepin it goin till New Year for slow pokes like me who are "behind on thier time"? If for some reason this offer falls thru, i PROMISE i will come up with somethin, though im sure that i still have the kit somewhere down in the "cave"!!

boy that eagel is tempting to grab,, been taunted by acoulpe of guys for me to build one or miss unlimted in the past but never had the funds to get one....like to snag it if possible?? I dont have alot to give,most of my stuff are rtr stuff ,,proboat hydro's and miss vegas.. do have two good Jr 270 servos to give away and one flex shat for 1/12& strut assembly to a proboat hydros and one 1/8 scale proboat complete flex shaft with strut assambly from my boyfriends 1/8 proboat hydro..I'll dig threw my R/C stuff today to see what else I can giveaway..

Miss Hydro, you might as well show the guys that you can do it! Sooooo....PM me your address and if i still have it (which im sure that i do), ill get it out to you! i doubt you will see it by Christmas, but ill get it out as quick as i can.....i gotta see what other stuff i can scrounge up that somebody might want so.....Merry Christmas!

Thankyou very very much! and marry christmas!! the parts that are missing? I do have a friend in portage IN made templates of that eagel..he proubley can send me the temps on the parts that is missing..

 

[HOTWATER]

As BOB Cratchet said to Scrooge, please forgive me sir...as i am behind on my time! im 99% sure i have a Dumas Eagle Sport 40 hydroplane kit somewhere in my shop....it might be missing a coupla pieces of wood, but as i remember its all in good shape...if someone would like to have it, ill take care of shipping...didnt want to miss out on this Andy, i think its a wonderful idea...how bout keepin it goin till New Year for slow pokes like me who are "behind on thier time"? If for some reason this offer falls thru, i PROMISE i will come up with somethin, though im sure that i still have the kit somewhere down in the "cave"!!

boy that eagel is tempting to grab,, been taunted by acoulpe of guys for me to build one or miss unlimted in the past but never had the funds to get one....like to snag it if possible?? I dont have alot to give,most of my stuff are rtr stuff ,,proboat hydro's and miss vegas.. do have two good Jr 270 servos to give away and one flex shat for 1/12& strut assembly to a proboat hydros and one 1/8 scale proboat complete flex shaft with strut assambly from my boyfriends 1/8 proboat hydro..I'll dig threw my R/C stuff today to see what else I can giveaway..

Miss Hydro, you might as well show the guys that you can do it! Sooooo....PM me your address and if i still have it (which im sure that i do), ill get it out to you! i doubt you will see it by Christmas, but ill get it out as quick as i can.....i gotta see what other stuff i can scrounge up that somebody might want so.....Merry Christmas!

Thankyou very very much! and marry christmas!! the parts that are missing? I do have a friend in portage IN made templates of that eagel..he proubley can send me the temps on the parts that is missing..

You go girl!

-Kent

 

[Glenn Gates]

I've got a 40" rigger hull I'd like to part with-very nice looking hull sealed and painted. NOT drilled for standard hardware. Skid fin and bracket included. Also mounts for 1/4 scale steering servo and standard throttle servo. I'll take care of the shipping in the lower 48.

Glenn

 

[HOTWATER]

I've got a 40" rigger hull I'd like to part with-very nice looking hull sealed and painted. NOT drilled for standard hardware. Skid fin and bracket included. Also mounts for 1/4 scale steering servo and standard throttle servo. I'll take care of the shipping in the lower 48.

Glenn

Nice Glenn!

 

[Corey Chapman]

I've got a 40" rigger hull I'd like to part with-very nice looking hull sealed and painted. NOT drilled for standard hardware. Skid fin and bracket included. Also mounts for 1/4 scale steering servo and standard throttle servo. I'll take care of the shipping in the lower 48.

Glenn

I'll take it if it's still available. Corey

 

[Glenn Gates]

I've got a 40" rigger hull I'd like to part with-very nice looking hull sealed and painted. NOT drilled for standard hardware. Skid fin and bracket included. Also mounts for 1/4 scale steering servo and standard throttle servo. I'll take care of the shipping in the lower 48.

Glenn

I'll take it if it's still available. Corey

It's yours Corey, Won't be able to send till mid Jan. Hope thats O.K.

Glenn

 

[chris1088]

Going through some stuff I came up with a K&B red carb without the needle, otherwise it looks like new.

Merry Christmas

Bob

Bob i sent your rod out today .Marry Christmas

The K&B steering arm still needs a home

 

[MattHench]

hey bob i'll snag that carb if still have thanx matt

 

[MattHench]

I have a brand new pull start, backplate and starter shaft for a .18 TZ up for grabs !!!!!!

 

[Bill Gibson]

Okay, i did some more diggin...MAN! What an RC Boat PACKRAT i am!!! I found a K&B 3.5 Outboard motor used but in the box if someone would like it...It says #8907 on the box and its watercooled, has a black carb, and i dont think its too ancient as it has the long skeg on the foot.The only things missing on it are the throttle arm and the tail shaft, but if i can find these parts, ill put em on and the motor will be complete...turns over smooth and the compression still feels good. Might be a good start for a new boater on a tight budget....ill take care of the shipping on this one too....after all it is Christmas! HO! HO! HO! :lol:

 

[M@MRacing]

Chris i take the steering arm if still available thanks Robert Merry Christmas

 

[Andy Greene]

Okay, i did some more diggin...MAN! What an RC Boat PACKRAT i am!!! I found a K&B 3.5 Outboard motor used but in the box if someone would like it...It says #8907 on the box and its watercooled, has a black carb, and i dont think its too ancient as it has the long skeg on the foot.The only things missing on it are the throttle arm and the tail shaft, but if i can find these parts, ill put em on and the motor will be complete...turns over smooth and the compression still feels good. Might be a good start for a new boater on a tight budget....ill take care of the shipping on this one too....after all it is Christmas! HO! HO! HO! :lol:

Thats dang tempting Bill , Im kinda kicking around running Mics new series next year.

Still a long way from being ready for a motor though-

If some-else doesnt need it after this is done lets talk.

Rest assured , whoever gets this is getting a VERY CLEAN piece,

We dont call him Windex Man for nothing

Andy

 

[Marty Slater]

Hay Bill if that outboard is still up for grabs i would like to have it

Marty

 

[Bill Gibson]

Okay, i did some more diggin...MAN! What an RC Boat PACKRAT i am!!! I found a K&B 3.5 Outboard motor used but in the box if someone would like it...It says #8907 on the box and its watercooled, has a black carb, and i dont think its too ancient as it has the long skeg on the foot.The only things missing on it are the throttle arm and the tail shaft, but if i can find these parts, ill put em on and the motor will be complete...turns over smooth and the compression still feels good. Might be a good start for a new boater on a tight budget....ill take care of the shipping on this one too....after all it is Christmas! HO! HO! HO! :lol:

Thats dang tempting Bill , Im kinda kicking around running Mics new series next year.

Still a long way from being ready for a motor though-

If some-else doesnt need it after this is done lets talk.

Andy

Andy, if someone else doesnt take it, ITS YOURS BROTHER! (i might even have another one layin around...im just not sure!)

 

[misshydro]

Okay, i did some more diggin...MAN! What an RC Boat PACKRAT i am!!! I found a K&B 3.5 Outboard motor used but in the box if someone would like it...It says #8907 on the box and its watercooled, has a black carb, and i dont think its too ancient as it has the long skeg on the foot.The only things missing on it are the throttle arm and the tail shaft, but if i can find these parts, ill put em on and the motor will be complete...turns over smooth and the compression still feels good. Might be a good start for a new boater on a tight budget....ill take care of the shipping on this one too....after all it is Christmas! HO! HO! HO! :lol:

Thats dang tempting Bill , Im kinda kicking around running Mics new series next year.

Still a long way from being ready for a motor though-

If some-else doesnt need it after this is done lets talk.

Andy

Andy, if someone else doesnt take it, ITS YOURS BROTHER! (i might even have another one layin around...im just not sure!)

bill if you got a .40 laying around PM me please..