3 Channel Stick FM radio options

[Tony Jacuzzi]

Which three channel 75mhz stick radios are there out there. I would like multiple model memmory etc, just the transmitter. Any opinions on the different brands/ I currently use all Futaba stuff,and I would ike it to be compatible.. Thanks Tony J

 

[Eric Bourlet]

I use the Airtronics Super Exzes It has been a great radio. I got the 27 MHz synthesized module as well as the 75 MHz crystal controlled version so I can not only change channels but change bands. It has worked great for me for several years now.

 

[Tim_Duggan]

Tony,

Not sure if it is available in the US, but there is a Futaba 3VCS which is supposedly a stick version of the 3PK. From what I can tell it uses the same module as the 3PK, so if you can't get it on the correct band you could swap over the module. 3VCS

There is also the KO propo 3 channel stick radio Vantage R Not sure about compatability with Futaba Rx's though.

Tim.

 

[Mike Hughes]

Link to 3VCS It is under car radio sets.

Here ya go. It is on 75 and everything. The 3PK will switch from PCM, FM, & HRS. If the 3VCS is the same electronics as the 3PK than you are not going to have a problem. I can't seem to find a spec sheet for the 3VCS any where. The US site for Futaba does not post it. There may a site elsewhere that may show it, but I can't find it. Anybody else know of one out there?

Mike

 

[Richard_Tran]

That radio's sick; I saw in another magazine, marine modelling international, that JR even has a 2-stick version of their R-1, the R-756..These radios are probably available only overseas....

 

[Tim_Duggan]

That radio's sick; I saw in another magazine, marine modelling international, that JR even has a 2-stick version of their R-1, the R-756..These radios are probably available only overseas....

The R756 is an older wheel set - based on the OLD KO EX5 case. Older than the R1.

 

[Speed Jr.]

Futaba 4EX FM

Youll need to specify for 75 MHZ. I use it for my twin, very simple and easy with 3rd channel remote needle. 4 Model Memory.

Larry

 

[John Palica]

Tony, take a look at the Hitec Ranger III FM system. I'm not particularily fond of the third channel slide knob for mixture control. Mine is an earlier version with a twist knob for the mixture. Ace used to have a transmitter with sticks for boats. Neither have multiple model memory though. Just basic radios. I know the Hitec has servo reversing capability.

 

[MikeP]

That futaba 3VC looks nice.

More Pictures

http://www.hobbystores.co.uk/asp/default.a...ew&ItemId=CB3VC

 

[ALLAN YUEN]

That futaba 3VC looks nice.

More Pictures

http://www.hobbystores.co.uk/asp/default.a...ew&ItemId=CB3VC

h34r: " Be Cool" Look Nice! Hope to Futaba 3VC come in north american. Great good for Twin rigger.

Remember Old Gold 2 stick 3ch AM great wonderful so no long available make.

 

[DarthRigger]

JR did make a 3 channel stick used the same module as the R1.Had 10 channel memory and the works.

I had one 4 years ago I think I got it from Doug Shepard In Indiana .while I was in INDY.I dont remember the model number but at that time you could still get it in europe.

Does anyone know of any good dealers in europe to order from?

Roy