2025 Backlash

[Roxyflash]

Would sit to high the wire ties will do the trick

 

[Martin Law]

Bruce,

The tank sits on the bottom of the tub. The strips are on both sides of the tank so no height added. The velcro across the top is no higher than the vent tube bubble.

Marty

 

[Roxyflash]

That would work I’m happy with zip ties will post some more pictures tonite trimmed the cowl added the tongue next will be cowl magnets.

 

[Roxyflash]

Glued a piece of g10 for the tongue it centers the front of cowl perfectly cut the plug hole and exhaust cut out here’s a couple pictures.

 

[Roxyflash]

Epoxied a piece of g10 for magnet mounts used some of the 1/8x1/4 bass wood sticks around the perimeter to glue the g10 onto was simple had it fabbed up in no time.I found these mounting magnets on Amazon under 10 shipped I used 6/32 screws to mount them I need to find some 6/32 fender washers for the cowl under the acorn nuts next is sanding and sealing.