Search results

Intlwaters

Help Support Intlwaters:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
  1. TomGracey

    Sealing Question

    That is 100% correct Mark on anything structural but for the propose of just protecting to non -structural wood surfaces, strength is not a consideration just stopping water infiltration into the wood and it's far less labor intensive to do 1 thinned coat followed by a non thinned final coat...
  2. TomGracey

    Sealing Question

    I use West Systems 105 thinned with denatured alcohol to the constancy of water the thinned Epoxy penetrates much deeper into the wood and is not so difficult to sand to apply a finish coat I apply a heavy coat of the thinned mix and wipe off the excess with a lint free paper towels. After it...
  3. TomGracey

    Run in stand/dyno build.

    Ware did U get the ducked fan unit and what size is it. I'm thinking of remodling my breakin stand by replacing the 3 blade aircraft prop Im now using. Just to large with the saftey shroud over the prop just incase it trough's a blade and keep hands out of the prop
  4. TomGracey

    Anyone know what make hull this is?

    Dont know the brand But if your thinking of buying it LOOK CLOSELY AT the side above the chine there is bondo work and a repaint obviously been wrecked
  5. TomGracey

    Hughey prop gauge....Sold

    Payment sent tnx rod
  6. TomGracey

    Hughey prop gauge....Sold

    I'll take it TXT Me @ 360 618 two eight four nine for my Pay Pal
  7. TomGracey

    Formula

    What is the formula for calculating the Kv of an electric motor IE: say 1600Kv
  8. TomGracey

    found 7.5 Hi Jack outboard mount

    Found 1 Victor had some in stock BIG TNX to Gabe at StumpFab for hooking me up with him:):)🤞
  9. TomGracey

    7.5 Hi-Jack Outboard Mounts

    I'd like one if U still have any left
  10. TomGracey

    found 7.5 Hi Jack outboard mount

    Looking for a 7.5 Hi Jack outboard mount. If anyone has one they would part with please let me know. Color is not important
  11. TomGracey

    Motor Mount

    Can someone help me I.D this motor mount for a K&B lower unit Brand - dealer and who sells them. I'd like to find another one for a FE build
  12. TomGracey

    Tunnel Hull Lenght

    TNX
  13. TomGracey

    Tunnel Hull Lenght

    Can some one give me just HULL length of a LEE CRAFT XT-460 -RW LEE 40/60 TUNNEL HULL hull only not with the motor & lower unit TNX
  14. TomGracey

    NEW in the box Himax HB3630 -1500 motor SOLD

    SOLD For all you 1/10th scale folks a NEW in the box Himax HB3630 -1500 motor and including a free cooling water jacket . asking Firm $80.00 shipped to US lower 48 only only Pay-Pal accepted
  15. TomGracey

    Motor Adaptor Plate

    Who makes an electric motor adapter plate to fit an K&B Lower leg
  16. TomGracey

    Cool water line routing

    I have modified the rudder for more volume drilled out the water passage's to 1/8th and made new fitting out of .167 OD x .123 ID stainless steel tubing threaded to 10-32
  17. TomGracey

    Cool water line routing

    TNX That's what I thought just wanted to make sure
  18. TomGracey

    Cool water line routing

    Since I'm kind of new to Gasser's. I know they run way hotter especially at the exhaust side. Do U run the cooling water to the exhaust flange first or to the head water jacket first. The rudder supplied be Seaducer only has a single outlet. ????
  19. TomGracey

    Seaducer 44 Gasser Mono

    The mock-up done time to break it down clean it up (have to clean the shop first ) then add some flotation button up the fuel/water lines and do the final assembly. Unfortunately it's fall in Western Wa. so getting some descent wx to go play with it will be iffy
  20. TomGracey

    Bob Austin 2514/2 blade prop

    Do you have any props for the 44 inch Seaducer running a stock G260 PUM
Back
Top