Samuel Hagan JR
Well-Known Member
- Joined
- Jul 18, 2010
- Messages
- 4,673
I’m pretty sure I built a boat to heavy but does weight of a boat effect FE the same as it does Nitro.
Boat weight effect.
- Thread starter Samuel Hagan JR
- Start date
Help Support Intlwaters:
- Joined
- May 1, 2023
- Messages
- 367
FE continues to pull amps until infinity or something lets out the smoke. so it wont appear to be affected until you look at the data log.
Hydro Junkie
Well-Known Member
- Joined
- Oct 2, 2006
- Messages
- 5,800
I have to agree with Dave's post. To take it one step further, the more weight you end up with, the more it's going to cost you. When it comes to boats, more weight means:
- more power is needed to get the boat up on plane
- top end will be lower since the boat will probably have more contact area with the water
- the boat won't want to turn as easily due to inertia
- shorter run times due to needing more power to get the boat up and keep it up
- Joined
- Mar 11, 2002
- Messages
- 4,398
It will have the same effect as the nitros as far as acceleration...it just wont be the same unless you look at GS course logs or data logs as other have said already.
Ultimately, electric boats are generally 'too fast' for their size for most current designs so weight is your friend!
Ultimately, electric boats are generally 'too fast' for their size for most current designs so weight is your friend!
- Joined
- Jan 18, 2021
- Messages
- 38
While as an engineer I agree the basic assumptions are correct less weight is generally better however I would say only generally. If you can make it lighter (assuming no other trade off like strength) you should.
However the benefit in actual practice is not so obvious. For example in LSG Thunderboat fiberglass boats compete very well against wood boats. This is despite that fiberglass boats tend to be 1-3 lbs heavier than wood boats.
So my opinion
Lighter is better. However things like hull design, aerodynamics, prop selection, overall tuning are probably more important as a whole.
Just my 2 cents.
However the benefit in actual practice is not so obvious. For example in LSG Thunderboat fiberglass boats compete very well against wood boats. This is despite that fiberglass boats tend to be 1-3 lbs heavier than wood boats.
So my opinion
Lighter is better. However things like hull design, aerodynamics, prop selection, overall tuning are probably more important as a whole.
Just my 2 cents.
- Joined
- Oct 29, 2009
- Messages
- 703
Well the law of physics does not care what is used for power so the same rules to going fast... make it light, strong, test and fast will come...
Samuel Hagan JR
Well-Known Member
- Joined
- Jul 18, 2010
- Messages
- 4,673
This is the answer I was looking for. It feels heavy to me. I had another person look at it and it seems fine to them. Thanks.
- Joined
- Dec 27, 2001
- Messages
- 9,866
Weight dictates how much energy it takes to accelerate AND then deaccelerate the model. We boaters to not care so much about deacceleration so the lighter the better when it comes to acceleration. Gee forces are effected as you have less force on the acting surfaces on and in the water (i.e. turn fin)
Lighter is better.. but.. all other performance aspects of the boat can become hyper irregular. (meaning you better have your ^^^ together.. LOL)
Grim
P.S.
in altitude rocketry BOTH are important.. (A very sticky balance).. a fun game!
Lighter is better.. but.. all other performance aspects of the boat can become hyper irregular. (meaning you better have your ^^^ together.. LOL)
Grim
P.S.
in altitude rocketry BOTH are important.. (A very sticky balance).. a fun game!
LohringMiller
Well-Known Member
- Joined
- Jan 25, 2017
- Messages
- 964
Electric motors have lots of low end torque that really helps. On the other hand, my Leecraft XT-460 with P limited electric power weighs around the same as it did with an 11 cc K&B. The electric power plant has lots more power making the boat seriously faster. That gives problems I haven't completely solved.
Lohring Miller
Lohring Miller
