- Joined
- Apr 27, 2007
- Messages
- 3,490
In the stock outboard 20 tunnel classes, can you run the OS inflight needle mounted directly on the OS carb or do you have to run the stock needle?
B-stock/A-OPC engine legality Q
- Thread starter RaceMechaniX
- Start date
Help Support Intlwaters:
- Joined
- Dec 27, 2001
- Messages
- 9,803
Stock...
- Joined
- Apr 27, 2007
- Messages
- 3,490
OK, so you guys are just backing out the stock needle if using a remote needle? I assume you cannot cut off the needle either?
- Joined
- Dec 27, 2001
- Messages
- 9,803
thats right.. however I am not an expert as I have never used one on a sport tunnel.
- Joined
- Feb 23, 2003
- Messages
- 4,402
That is correct for NAMBA. Original needle must be used. I just back it out.
Mike
Mike
- Joined
- Apr 21, 2008
- Messages
- 546
I ran into that problem at the NAMBA Nats 2021. Mark Grim mentioned to me that I have to use the original needle (even I had the OS Inflight needle in a Ferrette base) So I installed it real quick and backed it out as far as possible.
Alex
Alex
- Joined
- May 28, 2004
- Messages
- 4,290
I cut my needle off and screw it in tight.That way it willn't fall out.
- Joined
- Apr 21, 2008
- Messages
- 546
If you cut the needle it is considered " removing material" by the NAMBA rule. So you could be disqualified if the judge catches it.
Alex
- Joined
- Mar 11, 2002
- Messages
- 4,389
Is this a question for you? Or are you "asking for a friend" Tyler? ;-)
- Joined
- Dec 27, 2001
- Messages
- 9,803
you CAN NOT legally cut the needle
- Joined
- Oct 17, 2002
- Messages
- 4,758
Tyler my understanding is your allowed to cut the needle off since IMPBA rule stock appearing from outside. So swirl machined carbs would not be legal since you can see the swirls and the exhaust outlet and carb inlet still have to meet max dia.
- Joined
- Dec 27, 2001
- Messages
- 9,803
H10, B3
The engine external parts shall remain as originally manufactured
Seem this part would qualify as a external part.
Grim
The engine external parts shall remain as originally manufactured
Seem this part would qualify as a external part.
Grim
- Joined
- Apr 27, 2007
- Messages
- 3,490
Thanks guys,
-Tyler
-Tyler
Similar threads
