2024 IMPBA Nitro Internats - Huntsville Alabama

shop deals on amazon
Shop deals on ebay
Advertise with us
Intlwaters

Help Support Intlwaters:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
I hope you are all starting your testing for the event.. I got out (First time this year) had a great time.. Put 3mph on the sport 40 and got a nice test run in with the sport tunnel.

This is going to be an odd feeling race for me.. I will not be racing a tunnel I have not designed, in over 20 years of racing.. LOL

BUT.. we are in good hands.. (in the end HEED ALL EPOXY WARNINGS!)

Thanks

Grim
 
So I entered the banquet, got shirt size & 3 boat classes I'm going to mail my funds in later.
Site only shows me as having banquet ticket and shirt size...so what's the deal here ?
 
Sometimes racers are having trouble getting rcracingevents to play fair. Many times, it has been because they are trying to enter with their phone or a tablet. Be patient and try again later. I am NOT an IT guy so I can't tell you why it is happening. We still have plenty of time. If you get irritated just email me and sent a check.

Rick Grim
508 Harvest Rd
Harvest, AL 35749
[email protected]
Please make the checks out to HMBA
 
By the rule book YES. However, the speed of the B hydro's is far superior to the A riggers and the wakes they generate would make it very hard for an A rigger to finish a heat.
 
We are one month out from the entry cutoff date for the 2024 International Regatta. Several classes do NOT have the required 8 boats entered to make the requirements for US-1. Please get your entries in.

I Know rcracingevents has been giving you trouble. Email me and send a check if you can't get it to play fair.

Rick Grim
508 Harvest Rd
Harvest, AL 35749
[email protected]
Please make the checks out to HMBA
 
RaceMechaniX said:
Are you allowed to run a smaller displacement boat in the next class up for the Internats? i.e. A-hydro running in B-Hydro?
Click to expand...
In IMPBA clubs have allowed it at times, but to my understanding at a National Event it should never happen. Engine displacement is carried out three places in the rule book. So A ends at .129 B starts at .130. etc etc . This was discussed about F hydro on this site before as it starts at .671 and Mike Schindler even spoke up that a .67 should not run in F hydro as a example. If the rule book states different I haven’t seen it and would be curious for someone to show the rule. Jeff Lutz
 
RaceMechaniX said:
Are you allowed to run a smaller displacement boat in the next class up for the Internats? i.e. A-hydro running in B-Hydro?
Click to expand...
You have always been able to do that for many years. It is A-B Hydro, A-B Mono, C-D Hydro and C-D Mono. Now the A hydro was broke out a few years ago to be a class by itself but the A-B class listing stayed the same.
 
Mark Bullard said:
You have always been able to do that for many years. It is A-B Hydro, A-B Mono, C-D Hydro and C-D Mono. Now the A hydro was broke out a few years ago to be a class by itself but the A-B class listing stayed the same.
Click to expand...
Mark, on the entry it has A hydro and B hydro separately. But just curious, does the rule book allow this? Or is it clubs allowing it?
 
I DON'T UNDERSTAND RACING EVENTS, I'M ON COMPUTER TRYING TO ENETER, BUT NO CLASSES TO ENTER COME UP, JUST SHIRT SIZE...WTF... AM I DOING SOMETHING WRONG OR IS OTHERS HAVING TROUBLE TOO ???
 
RickGrim said:
We are one month out from the entry cutoff date for the 2024 International Regatta. Several classes do NOT have the required 8 boats entered to make the requirements for US-1. Please get your entries in.

I Know rcracingevents has been giving you trouble. Email me and send a check if you can't get it to play fair.

Rick Grim
508 Harvest Rd
Harvest, AL 35749
[email protected]
Please make the checks out to HMBA
Click to expand...
Rick, does the 8 boat minimum apply to just the heat racing portion or for all the events?
 
Alan Elzer said:
I DON'T UNDERSTAND RACING EVENTS, I'M ON COMPUTER TRYING TO ENETER, BUT NO CLASSES TO ENTER COME UP, JUST SHIRT SIZE...WTF... AM I DOING SOMETHING WRONG OR IS OTHERS HAVING TROUBLE TOO ???
Click to expand...
There are separate entries link for the shirts and banquets and then the events. Keep scrolling down the page and you will see the SAW, 2-lap and heat racing links.
 
Alan Elzer said:
I DON'T UNDERSTAND RACING EVENTS, I'M ON COMPUTER TRYING TO ENETER, BUT NO CLASSES TO ENTER COME UP, JUST SHIRT SIZE...WTF... AM I DOING SOMETHING WRONG OR IS OTHERS HAVING TROUBLE TOO ???
Click to expand...
There is a separate listing on RC Racing for each event.
First is banquet and T-shirts
Second listing is SAW events
Third is Oval Timed event
And the last is the heat racing event.
You enter in 3 to 4 separate places.
 

Similar threads

Chris Wittrig
👉 ENTRIES REOPENED | 2024 IMPBA Nitro Internationals 👈
Replies
10
Views
701
longballlumber
longballlumber
Mark Bullard
2024 IMPBA Nitro Internats Class Sponsors
Replies
11
Views
651
Richard Hartley
Richard Hartley
C
IMPBA D2 Hydrofest 2024
2
Replies
30
Views
2K
jesse zipper
J
D
2024 Motor City Model Boat Club Annual Power Stroke Classic
2
Replies
33
Views
2K
ZZ RACING
ZZ RACING
Buckshot
2024 IMPBA 25th Anniversary Gas National Sponsorship Opportunities
Replies
7
Views
850
Buckshot
Buckshot

Latest posts

Back
Top