Parts Wanted Wtb woods style oiler

[Roxyflash]

Looking for a hydro style 11/32 oiler

 

[Kent Fowler]

You could make one out of a nitro pill bottle,

 

[Roxyflash]

How does it clamp on or is it glued on?

 

[FloridaScaleBoater]

How does it clamp on or is it glued on?

The blue one looks to be held in place with JB Weld.
Zoom in on the bottom

 

[Kent Fowler]

The pic above on the left is in my circus circus hydro which is not completed, that one is pressed right onto the shaft ,I will probably just add some JB, although the fit is quite snug, the one on the right is in my Clonerunner, look at the pic on the bottom that one is drilled with the 11/32 glued in and then slid over the shaft and soldered with a small dot to the existing stuffing tube.

 

[Kent Fowler]

FYI ,drill bit no good . I used this,

 

[Kent Fowler]

Okay, I just made this one because I've been thinking about it for a while,made from a remote clamp, once you have it clamped to the stuffing tube ,turn barrel where you want it and tighten from inside. Cost under five$ and works perfect

 

[Roxyflash]

Great idea nice and simple I may build one with the tubing on the side to get the angle so it sits square to hull just drill the pill bottle on the correct angle slide the brass tube tru the hole then fill the bottom of pill bottle with jb weld to just above the brass tube let it dry then slide it on the stuffing box solder it on then drill the hole

 

[douglong]

Okay, I just made this one bcuz I've been thinking about it for a while,made from a remote clamp, once you have it clamped to the stuffing tube ,turn barrel where you want it and tighten from inside. Cost under five$ and works perfect

Will you be making these to sell?
Thanks Doug Long

 

[raceready]

Looking for a hydro style 11/32 oiler

Roxyflash , I got one if interested (new) 25.00 shipped us only. SOLD

 

[douglong]

Bruce, if you don't want it I'll take it for $25.00

 

[Roxyflash]

I will take it pm your payment info will take care of it Thursday

 

[Kent Fowler]

Will you be making these to sell?
Thanks Doug Long

I started making these because the woods oilers are obviously very hard to come by, never thought about making these for sale, if you need one , you can PM me with the particulars you're looking for and if you're not in a hurry I will make one for you.

 

[raceready]

I will take it pm your payment info will take care of it Thu

I will take it pm your payment info will take care of it Thursday

Paypal FF [email protected]

 

[Timbo Whalen]

Okay, I just made this one because I've been thinking about it for a while,made from a remote clamp, once you have it clamped to the stuffing tube ,turn barrel where you want it and tighten from inside. Cost under five$ and works perfect

Be careful with that Zipp type clamp fitting....the brass nipple tends to snap off from vibration in relative short order.

 

[Roxyflash]

Money sent pm you the address

 

[raceready]

OILER IS SOLD THANKS

 

[raceready]

Money sent pm you the address

tracking #9500115853343334988631

 

[Kent Fowler]

Be careful with that Zipp type clamp fitting....the brass nipple tends to snap off from vibration in relative short order.

Thank you for the heads up Tim!!.. I appreciate you.... just got home and changed things up! Used the 3/32 Allen head drilled out instead.