WTB or TRADE carb for rossi .12

[chuck st romain]

looking for a rotory carb for a nova rossi .12. i want to use this motor in the JAE rigger and it now has a slide carb on it. if anyone has a rotory carb or information on hooking up a cable to use the slide carb it would be greatly appreciated..

 

[TERMINATOR]

looking for a rotory carb for a nova rossi .12. i want to use this motor in the JAE rigger and it now has a slide carb on it. if anyone has a rotory carb or information on hooking up a cable to use the slide carb it would be greatly appreciated..

i have a carb for 35.00 you can buy, it is off the .12 motors, im using something else.

tk

 

[GeorgeThomas]

Will a OS carb work on the engine. I have some of them i have took off old engines over the years Let me know

 

[153stars]

looking for a rotory carb for a nova rossi .12. i want to use this motor in the JAE rigger and it now has a slide carb on it. if anyone has a rotory carb or information on hooking up a cable to use the slide carb it would be greatly appreciated..

I used a 1/16'' cable through a 90 bent annealed brass tube to a 21 slide carb before it worked fine.Push to open. A .12 you could probably get away with smaller.,

I not telling you not to use a rotary carb but it's an option.

 

[Wally Teresch]

Had a N/R 21 with a slide carb on it in a mono. I just mounted a bellcrank onto a bracket that bolted to the engine mount and used a regular pushrod from the servo to the bellcrank and then a short piece of rod with a balllink to the slide carb. Worked fine for me.

Wally