WTB Dumas SK Daddle 40

[ChrisHerzog]

I would think you should be able to bring a copy of that pic to an office supply place and have them print it the size you want. That’s what I was going to try and do.

 

[ChrisHerzog]

I copied then printed the first pic off this thread, brought that to Office Depot and asked them to blow it up so that I end up with a 32” long hull.
This is by no means perfect but it’s definitely useable. I plan on building an elec boat starting off with this but may make some mods along the way.

 

[David Bryant]

yes, if you go to a graphics type busIness, they should be able to print or plot those files to full size (or actual size). So when you place drawing on flat surface the hull length should measure approx 35”

Time permitting, I can/will eventually cutout and trim original wood parts (bulkheads, etc.,..), and trace each part onto a single drawing. Afterwards have drawing scanned

 

[ChrisHerzog]

I’m not sure if anyone is still interested in any of this but I picked up two “new”old stock Dumas kits this week, a 36” long hull kit and a 27” long hull kit. A guy near me posted them on Marketplace, so I bought both of them from him. I really just want to trace out the frames in the larger kit ( to make a larger hull down the road.
If you’re interested in one of these two kits, or both, make me an offer. I can post pics if you want. Just keep in mind that I will be taking the frames out of the larger kit to trace them out before I ship it.

 

[Steve White]

I’m not sure if anyone is still interested in any of this but I picked up two “new”old stock Dumas kits this week, a 36” long hull kit and a 27” long hull kit. A guy near me posted them on Marketplace, so I bought both of them from him. I really just want to trace out the frames in the larger kit ( to make a larger hull down the road.
If you’re interested in one of these two kits, or both, make me an offer. I can post pics if you want. Just keep in mind that I will be taking the frames out of the larger kit to trace them out before I ship it.

What are you asking for the 36" kit?

 

[ChrisHerzog]

What are you asking for the 36" kit?

Idk, 100 plus the ride. That’s basically what I have in it.

 

[Steve White]

Idk, 100 plus the ride. That’s basically what I have in it.

Ok. PM me your payment information, ship to 76116. I'll send my my address on the PM.

No rush on sending it, take your time with the templates you are doing.

Thanks dude.

 

[David Bryant]

yeah, the 36” version is the original Dumas “SK Daddle” model kit. It would run well using a new .45 nitro engine, and modern hardware

 

[Bryan haley]

I called and talked to a real nice guy at Dumas products, ordered over the phone. They have both the .20 and .40 sizes in stock.

The plans or the boat kit