Who can copy a prop?

[dwilfong]

I need a prop made.

Who can copy one and cast a new one with out shrinking it any.

Don't care about what it is made off.

 

[BradSpencer]

http://cocrracing.com.au/

 

[Patrick Mulvany]

Do you have a clue who's prop it is you want a copy of?? Best way is get with who made it then if it has been modded before you got it and it works , send it to them and let them make the same prop from the original!! That sounds like the best way to get an identical copy with expertise handling the action!!

Later!!

Pat

 

[Buckshot]

http://cocrracing.com.au/

+1I had a prop I worked on myself for the gas Jag's and kept throwing a blade or loosing pitch so when I made the last one and got it right I sent it to Peter @ CoCr and had him make a mold and cast some in his CoCr material. They came out as perfect copies and even a little thinner and sharper. Peter does great work.

 

[Ron Jefferson]

http://cocrracing.com.au/

+1I had a prop I worked on myself for the gas Jag's and kept throwing a blade or loosing pitch so when I made the last one and got it right I sent it to Peter @ CoCr and had him make a mold and cast some in his CoCr material. They came out as perfect copies and even a little thinner and sharper. Peter does great work.

Just curious, what does one of his props cost?

 

[dwilfong]

Well it is a Eric Canto worked H50 a old one that is 65mm. Spent some time today talking with him at his hobby shop and need 67mm/ 68mm H50's

The other one is a Andy brown 5077B/3. Andy said he was going to have some made but it's bin a wile now and none to be had.

So I ask again who can make me some props out of BeCu for the 67mm/68mm H50 and a stainless 5077B/3

Got with Peter and thy make them from that really tuff stuff. You will never tweak that prop at the pond.

May send him the 5077B/3 to do as it needs no adjustment as it is perfect as is.

I have bin talking with some one over seas about making a few.....will see if it pans out.

Looking for more than one of each prop.........

The H50 took a very long time to get right needs less to say there are no virgin 65mm H50 out there any more most come in under 63mm now.

 

[Chris Wood]

http://cocrracing.com.au/

+1I had a prop I worked on myself for the gas Jag's and kept throwing a blade or loosing pitch so when I made the last one and got it right I sent it to Peter @ CoCr and had him make a mold and cast some in his CoCr material. They came out as perfect copies and even a little thinner and sharper. Peter does great work.

Just curious, what does one of his props cost?

Ron a 21 prop is 110 dollars

 

[ALLAN YUEN]

http://cocrracing.com.au/

+1I had a prop I worked on myself for the gas Jag's and kept throwing a blade or loosing pitch so when I made the last one and got it right I sent it to Peter @ CoCr and had him make a mold and cast some in his CoCr material. They came out as perfect copies and even a little thinner and sharper. Peter does great work.

Just curious, what does one of his props cost?

Ron a 21 prop is 110 dollars

Wow small(40 to55mm) or large (57 to 70mm )prop only each cost $110?

I wonder that compare molding box vs cnc machine which one low price?

 

[dwilfong]

So imagine what 15+ props would be?

It's a toy boat remember................

 

[dion smith]

Ask Kris Flynn. He got Aaron's raw props and I'm sure there were some h50's left as I had Aaron do me one before he got out.