what is motor of choice for 45 Rigger

R-Roberts · Oct 28, 2005

What seems to be the motor of choice these day for a 45 size rigger.3 years ago I had 3 of 4 Picco 45'sbut even then parts were hard to come by I am guessing Picco never did come back out with marine engines due to the car market being so good.Let me know what you are running

Roy

piper_chuck · Oct 28, 2005

Mine's going to get a MAC .45 that Andy Brown just freshened up for me.

Dan_Cousin · Oct 28, 2005

The CMB 45 RS with the 7.3mm crank shaft is supposed to be good.

Don't get the one with the smaller crank as they had breaking problems. it must say 7.3mm crank (late 2005 model)

You can also find some good deals on the CMB CAM motors if your look around. They work well too.

Overboard · Oct 29, 2005

Dan_Cousin said:
The CMB 45 RS with the 7.3mm crank shaft is supposed to be good.

Don't get the one with the smaller crank as they had breaking problems. it must say 7.3mm crank (late 2005 model)

You can also find some good deals on the CMB CAM motors if your look around. They work well too.

The new CMB .45 is the best I found.