Boats For Sale Vintage Fusion Welding 90 Rigger

[Mike Byer]

Original Fusion Welding aluminum 90 rigger. Just like I received it, very clean with very nice paint. Engine mount drilled for an OPS 90. Sold as shown $1500 shipped in the lower 48. I have enjoyed looking at it on my shelf, now it's your turn to either run it or admire it.

 

[Mike Byer]

Pix

 

[SayMikey]

The only one of those I have ever seen belonged to one of the Fusion brothers. I believe it's a Fusion rigger not a Little Rock. Alan Has never been a rigger guy

 

[johnsteltzer]

Yeah that’s a fusion rigger awesome boat

 

[john v]

john urbowitz was the fusion rigger guy, he set many records in the day with his metal riggers

 

[Stevegross]

john urbowitz was the fusion rigger guy, he set many records in the day with his metal riggers

Where was he from?

 

[Jeff Lutz]

john urbowitz was the fusion rigger guy, he set many records in the day with his metal riggers

I remember him setting 1 record. F hydro 90 mph. Andy Brown had the F record with a customers twin at 89 mph set at the 1992 Nats. John broke that at 90 mph with a Picco .90 hydro and 2267 prop at a time trial.

 

[Tom Foley]

Very cool !

 

[Timbo Whalen]

Yeah that’s a fusion rigger awesome boat

Yeah, was hoping you'd see this, based on your last project.

Now, just seal the sponsons and shoes up real good, install some Presta valves, and pump 'em up with helium, huh.

 

[Timbo Whalen]

Cool factor = ∞!....
Narrow sponsons and shoes up, maybe widen sponson stance a bit, drop a full tilt 101 in her, hit the pond and let her eat.

 

[john v]

Where was he from?

john is from ct, he posts on jrcbd and sometimes on here, havnt seen him in a few years. wanted to buy one of his hulls just to hang on the wall of fame but never did, in there day they were fast

 

[Stevegross]

john is from ct, he posts on jrcbd and sometimes on here, havnt seen him in a few years. wanted to buy one of his hulls just to hang on the wall of fame but never did, in there day they were fast

Ok must be the same guy I ran boats with when I was a kid. Couldn’t remember his name but he had aluminum riggers that were super fast.

 

[Speed Jr.]

Fusion Welding. Cool boat.

 

[Jeff Lutz]

Don Pinckert helped John with developing this boat and the 90 mph record he held. If you look closely at the front sponsons they are basically Pinckert Coyote front sponsons with pointy tips.

 

[Alan Elzer]

Little Rock Welding never made an aluminum boats, just prop anvils & pitch gauges, outb conversion kits for CMB EVO 45'S

 

[Mike Byer]

Corrected