Tunnelstuff in Norway

[Joern Markset]

I’m also close to finish the gearbox for the OS gas engine. Just waiting for some new tools to come in from UK. (They are like Italiens, take ages before anything happens )

 

[anders-e]

I believe this is kinda close to what you asked for Or should I say demanded

Spot on.
Put the SPEED engine on my old Lynx tunnel today, became almost airborne.

 

[Wasted wages]

(They are like Italiens, take ages before anything happens )

Yeah, but as we like to say...
Rome was not built in a day!!

 

[Joern Markset]

Yeah, but as we like to say...
Rome was not built in a day!!

That is 100% true. I have a good relation to my Italian friends, just like to make a point out of it every now and then
On the flipside, I ordered some Sandvik tools, and they came on my door in the less than 24h, sent from Netherland

 

[Joern Markset]

Getting closer on my babygasser

 

[Joern Markset]

Spoiler alert.... There`s a new 25% in the making, getting ready for knocking on some doors in the near future.
It is not my design, and I`m not the one who gonna mold them. But, I`m making the hardware for it as we speak
Personally I believe this design will do good with all 3 powersources (gas, glow and el)

 

[Dirk Jan Cozy]

Nice tunnel design . It looks quite short, compared to the width and cowl size. But it could be the perspective of the image.
What do you mean by 25%? I keep an eye on this project

 

[Joern Markset]

Nice tunnel design . It looks quite short, compared to the width and cowl size. But it could be the perspective of the image.
What do you mean by 25%? I keep an eye on this project

25% is a quarter, means 1/4 scale. It is 1200 mm long. I see it my self now, the perspective is a little off.

 

[Joern Markset]

Things are moving really slow at the moment due to a spine injury, but here is some stuff I managed to put together.
Should be great for the guys who have turned 50 and no longer have the needed reaction for nitro power

 

[XtremeRcBoats]

Speedy recovery Joern.

Looks great again. What ratio are the gears and what rpm do you aim for at the prop?

 

[Joern Markset]

Speedy recovery Joern.

Looks great again. What ratio are the gears and what rpm do you aim for at the prop?

Thanks, Paul, I`m waiting for a surgery to take place very soon. Hopefully they will manage to get me back on my feet.

Ratio is 1:1;40
Engine should be able to do around 15K rpm, so around 21K on the propshaft. I prefer smaller props.
It is a lazy engine for sure, it was just something I did to feel relaxed

 

[BobSmith1]

Looks awesome Joern, speedy recovery!

 

[Alan Elzer]

Nice setup Jorn, thnx for what you do to help the outb classes.
Hope you get better soon..prayers

 

[Joern Markset]

This adapter will let you run the 45 GPX on a K&B or Lawless lower without any other mods to the engine ;-)

 

[anders-e]

Nice work Jörn.
Does it work on the red head 45 M-Line as well?
If so, I will have one.

 

[Joern Markset]

Nice work Jörn.
Does it work on the red head 45 M-Line as well?
If so, I will have one.

I`m not quit sure, I`ve lost my measurements from the M-line engine. Will have to ask Mauro if there is any difference.

 

[Brandon Atwell]

Hey Joern,
How’d that lawless to CMB 91 conversion work out? Ever get it wrapped up?

 

[Joern Markset]

Hey Joern,
How’d that lawless to CMB 91 conversion work out? Ever get it wrapped up?

Hey,
Have not been on the water for a while, so can’t tell anything about performance on the water. However, if the Lawless lower works ok with Zenoah, then the 91 or 1.01 should be pretty awesome as well.