Sport 20 rollcall

[Bradley Maglinger]

Nice!!!!

Send us some pics of your molding process

 

[Bradley Maglinger]

 

[Jarcaines]

Building a LeeCraft XS21

 

[Jerry Dunlap]

Building a LeeCraft XS21

I did not know that Tommy Lee designed a Sport 20.

JD

 

[Jarcaines]

Jerry,

He didn't. It was sold under the LeeCraft name when Alfred Lanza owned the molds. From what I understand it's an Arno Bert boat modified by Mike Hughes and set by Lanza.

 

[BullDogRacing]

GdAY David Ashcroft.
Isn't that one you have there a Steve Balanger Hull From QLD here in Australia??

 

[Bradley Maglinger]

Getting geared up for the season

 

[joelauletta]

Coming soon to a pond near you ³

 

[Josh Carlton]

RHT Marine Hull I hope to have out at some point in time

 

[bsmtboy2]

Here is mine... Class is dying out in D12.

 

[namba276]

RHT Marine Hull I hope to have out at some point in time

Josh, let's see whatcha got...I've built a lot of boats

 

[Josh Carlton]

It’s your old m&m boat I got for my kids and nephew to drive

 

[jim kapanowski]

Mine

 

[joelauletta]

Finally done and getting wet

 

[Bradley Maglinger]

View attachment 275535 View attachment 275533 View attachment 275533 View attachment 275534 View attachment 275534 Finally done and getting wet View attachment 275533

Looks Great! Have you got it in the water yet?

 

[Samuel Hagan JR]

Joel. What tanks are you using?

 

[joelauletta]

Joel. What tanks are you using?

Thanks , I'm using 4oz flex tanks from Sullivan. I heated them and forced them in while hot. Working great so far.
Yes its been in the water several times. Just playing with props. Very happy with it. need a little advise. It's flying down the straights turns great but hops all the way around and loses some speed.
Your thoughts please.

 

[Bradley Maglinger]

When mine was doing that I had to make sure my strut was 100% flat on the table. I run my strut 1" off the table and X440 or M440 prop. If mine had a hair of negative in the strut it would hop.

 

[joelauletta]

When mine was doing that I had to make sure my strut was 100% flat on the table. I run my strut 1" off the table and X440 or M440 prop. If mine had a hair of negative in the strut it would hop.

I'm running mine like yours at 1" Are you running 2 blade? I tried 440 3 blade not good 337 3 blade was ok so far the best has been an ABC H1515 2 blade screams down the straights falls off in the turns cause of that hopping. Going to try playing with turn fin.

 

[joelauletta]

Whos turn fin are you using?