SOLD Thanks OPS 3280, Used

[Tunnelbill]

I have a few pipes that need a good home, some are very hard to find.

1. OPS 3280 New with pressure fitting. $55.00 SOLD Pending Payment

2. OPS 3280 Used a few small dings, looks like it had a internal stinger at one time. $25.00 SOLD

3. GadjetCraft 20 O/B Pipe, Like New with Mount and Pressure fitting. $95.00 SOLD Pending Payment

4. SPP 20 Hydro Carbon Fiber Pipe, Used with Pressure Fitting and Speed Master Mount. $25.00 SOLD

All prices are shipped in the USA.

Thanks,

Bill

 

[nuzum]

I have a few pipes that need a good home, some are very hard to find.
1. OPS 3280 New with pressure fitting. $55.00

2. OPS 3280 Used a few small dings, looks like it had a internal stinger at one time. $35.00

3. GadjetCraft 20 O/B Pipe, Like New with Mount and Pressure fitting. $95.00

4. SPP 20 Hydro Carbon Fiber Pipe, Used with Pressure Fitting and Speed Master Mount. $25.00

All prices are shipped in the USA.

Thanks,

Bill

you have a p.m

 

[camaroboy383]

if that gadjetcraft pipe falls through ill take it,,,,let me know if it doesnt happen,,,,,, guess i was sleepin on this one...lol

alden

 

[Jerry Wyss]

Yeah, an you should always offer that pipe to the guy that sold it to ya too,, course I bought it from you first, lol

course, I'd just wanna wave it in Aldens face for a while, hehehe

 

[camaroboy383]

Yeah, an you should always offer that pipe to the guy that sold it to ya too,, course I bought it from you first, lol
course, I'd just wanna wave it in Aldens face for a while, hehehe

lol...hopefully, when you start waiving it you drop it,,,and i catch it,,,lol love you long time j-dub...............lol

alden

 

[Jerry Wyss]

:lol: I would'nt torture you too long with it,, I do believe that most of the dimensions of that pipe are

the same as the original stamped Irwin J-pipe,, but the Gadjet stinger is much longer. Trouble is,

it's just about as difficult to get an Irwin J in good shape as the Gadjet.

I've had 4 of the Gadjet, one went to the bottom, one back to Australia, I kept one and sold the

other back to Bill here.

 

[Glenn Quarles]

I have a few pipes that need a good home, some are very hard to find.
1. OPS 3280 New with pressure fitting. $55.00 SOLD Pending Payment

2. OPS 3280 Used a few small dings, looks like it had a internal stinger at one time. $35.00

3. GadjetCraft 20 O/B Pipe, Like New with Mount and Pressure fitting. $95.00 SOLD Pending Payment

4. SPP 20 Hydro Carbon Fiber Pipe, Used with Pressure Fitting and Speed Master Mount. $25.00

All prices are shipped in the USA.

Thanks,

Bill

Bill, I will take the 20 hydro pipe if it is still available.

Thanks,

Glenn

 

[moparbarn]

:lol: I would'nt torture you too long with it,, I do believe that most of the dimensions of that pipe arethe same as the original stamped Irwin J-pipe,, but the Gadjet stinger is much longer. Trouble is,

it's just about as difficult to get an Irwin J in good shape as the Gadjet.

I've had 4 of the Gadjet, one went to the bottom, one back to Australia, I kept one and sold the

other back to Bill here.

uh, not really, jerry. the gadjetcraft is shorter & fatter, i just compared them . the closest thing i know of is the original ssp j pipe. virtually identical, except for the funky cf layup with the string wrapping. only ever seen 1 of those. know where it is, but he ain't selling. new, unused, too.

 

[Tim_Duggan]

:lol: I would'nt torture you too long with it,, I do believe that most of the dimensions of that pipe arethe same as the original stamped Irwin J-pipe,, but the Gadjet stinger is much longer. Trouble is,

it's just about as difficult to get an Irwin J in good shape as the Gadjet.

I've had 4 of the Gadjet, one went to the bottom, one back to Australia, I kept one and sold the

other back to Bill here.

uh, not really, jerry. the gadjetcraft is shorter & fatter, i just compared them . the closest thing i know of is the original ssp j pipe. virtually identical, except for the funky cf layup with the string wrapping. only ever seen 1 of those. know where it is, but he ain't selling. new, unused, too.

I can definately tell you that all of them are subtlely different, and if there were similarities it was co-incedental. I was there when the original inboard Gadjet pipe was conceived in the 90's, and then later converted to O/B as well as doing the initial testing on it before they were ever sold. That pipe was conceived / refined using the Kavan prop test method and a crude dyno, then water testing.

Similar story with the SPP only about a decade later and without the prop test. It was originally conceived as the TD21 inboard pipe design. Dave H sent me one of the prototypes of that pipe, and I still use it to this day. The outboard version was known as NR21OB. Very needle and temp sensitive pipe, but when it's on, IT'S REALLY ON! The Gadjet is less sensitive and is a very capable pipe, particularly on the short stroke engines we were running at the time. I'd love to try one on a L/S modern engine.

Hiya Bill! - Sorry for the side track

 

[K-ZAM]

Hey Bill,

Do you have any of the SPP outboard pipes forsale?

Are you still a distributor?

Kentley

 

[Jerry Wyss]

"uh, not really, jerry. the gadjetcraft is shorter"

shorter from where to where? I get just under 6" from the begining of the coupler collar to the begining

of the convergence cone, baffle cone, the rear cone, the back cone, the cone thats reversed and what

ever else people call it. Thats on the Gadjet btw,, course I cut a little more than 1/2" off the coupler

collar to get a reasonable pipe length.

 

[Tunnelbill]

Hey Bill,
Do you have any of the SPP outboard pipes forsale?

Are you still a distributor?

Kentley

Mr Porter,

Sorry, I'm not a distributor. I have tried and tried to get pipes form SSP, I was told the pipes was shipped and in the mail. Well that was 2 1/2 months ago, still No Pipes. Look for the release of the TB21 Outboard pipe Soon.

Hey Tim,

I hope all is well with you and your family, Happy Holiday.........

TB

 

[shoboat]

Kentley,

The SPP pipe company has been sold from Dave Hatcliffe

to Aaron Alberico. I know Aaron and Ian are working

on some new designs, but I am not sure any are ready

for the market just yet. I have seen a few of the new

Nova Rossi 21 Inboard pipes and they look VERY NICE

INDEED.

Bill,

If the other 3280 is still for sale I will take it off your hands.

Let Me Know How To Pay You?

Happy Holidays,

Mark Sholund

 

[K-ZAM]

What is the TB21 outboard pipe?

Happy Holidays,

KP

 

[shoboat]

Kentley,

It must be the newest Tunnel Bill Pipe.

Have you tested it yet?

Thanks,

Mark Sholund

 

[Tunnelbill]

Kentley,
It must be the newest Tunnel Bill Pipe.

Have you tested it yet?

Thanks,

Mark Sholund

Hi Mark,

The OPS pipe is yours, I have tried to PM you but my PC is so Slowwwww tonight I can not do it. I will try to email you.

Thanks,

Bill

The TB21 is a Very Long story and I can not type that fast..............

 

[RIGGERMORTISE]

Kentley,

The SPP pipe company has been sold from Dave Hatcliffe

to Aaron Alberico. I know Aaron and Ian are working

on some new designs, but I am not sure any are ready

for the market just yet. I have seen a few of the new

Nova Rossi 21 Inboard pipes and they look VERY NICE

INDEED. biggrin.gif

Bill,

If the other 3280 is still for sale I will take it off your hands.

Let Me Know How To Pay You?

Happy Holidays,

Mark Sholund...............................................................

Just a corection here

SPP is still owned and operated by myself. Aaron did not end up buying the pipes due to other business commitments so we have spent the last 6 months reworking the system and will be back on line early next year. I have been offline with my own business but have now found a way to produce pipes without interupting my daily work . So Febuary next year we will have a new self serve web site with new 21, 45, gas and 21OB pipes. So sometime in febuary after I have recovered from my surgery the will all be available. Stock is being built now but wont be available until feb

regards

Dave Hatcliffe

 

[shoboat]

Dave,

Hope all is well with you and your family, and thank you for

keeping us up to speed on the SPP pipe business. If Ian,you,

and Aaron all work together the pipes should be winners.

I have some ideas if you guys need any new input.

Rest up and enjoy the holidays with your family.

Get Well Dave,

Mark Sholund

Bill,

I sent you a PayPal today for $30.00 for the pipe.

Thanks,

Mark Sholund

 

[K-ZAM]

SPP is still owned and operated by myself. Aaron did not end up buying the pipes due to other business commitments so we have spent the last 6 months reworking the system and will be back on line early next year. I have been offline with my own business but have now found a way to produce pipes without interupting my daily work . So Febuary next year we will have a new self serve web site with new 21, 45, gas and 21OB pipes. So sometime in febuary after I have recovered from my surgery the will all be available. Stock is being built now but wont be available until feb

regards

Dave Hatcliffe

Thanks for the update Dave.

 

[K-ZAM]

Kentley,
It must be the newest Tunnel Bill Pipe.

Have you tested it yet?

Thanks,

Mark Sholund

Hey Bill,

When are you going to send me one of your new prototypes?

I cant wait to test. Sounds like you are on to something!

Thanks,

Kentley