shaman tunnel steering servo

[bob miller]

what steering servo are you using for your shaman 7.5 outboard ?.....thanks....bob

 

[jaxracer]

I use a single Futaba s9351 in my mod 7.5 Shaman. Been using it for years in the boat. By far the best servo I've ever purchased. People say use the 1/4 scale servos or use two standards because you need more torque than that but you really don't. Mine works flawless.

-Mitch

 

[bob miller]

is there enough space for a 1/4 scale servo in a shaman ?......thanks.....bob

 

[Robert Pickard]

Run the servo Mitch is telling you its just as good as a 1/4 scale servo

 

[rumrunner]

Just make shore it has metal gears and for 7.5 more than 300 is good ,over 180 onces of tourqe for mod 3.5. This stops any problems in the turns , the boat is ment to turn wide open and it will .

 

[RonShaw]

Bob,

I like the digital Hitec 7990th. It has titanium gears and is the size of a standard servo, so you get 1/4 scale power in a small package. You will never have any problem turning with 400+ inch/oz torque!!!

In my 20 tunnels I use the 7950th titanium gear servo.

 

[Mike Hughes]

I run tandem 645MG.