- Joined
- Jan 5, 2006
- Messages
- 1,352
I'm putting together a used Phil Thomas Sort 40.It would definitely make life easier to mount the rudder servo in the back of the boat so i have plenty of room for a 3rd channel set up in the nose. Building a cf box is no problem.
However, I'm wondering about the best way to make a waterproof wiring connection from box to box. Suggestions? I know the last thing I want is a wad of gooped on silicone to make the seal.
I see most of the manufacturers of high torque digital servos (I am using a Futaba 9350 with a 6 volt battery) caution against using extensions. I suppose a key would using larger wire to reduce resistance and heat.
However, I'm wondering about the best way to make a waterproof wiring connection from box to box. Suggestions? I know the last thing I want is a wad of gooped on silicone to make the seal.
I see most of the manufacturers of high torque digital servos (I am using a Futaba 9350 with a 6 volt battery) caution against using extensions. I suppose a key would using larger wire to reduce resistance and heat.