Road Runner "F" Hydro and much much more

[toadstoys5]

I have a bunch of stuff i will be selling. I'm not getting out of the hobby entirely but will be reducing my fleet by some 20+ boats. All of my stuff is in excellent condition and was purchased from many popular prominent modelers such as Kenny Hildreth, Don Ferrette, Bob Finn to name a few.

We'll start off with the following:

Road Runner "F" Hydro that I purchased from Don Ferrette approximately 4 years ago. the boat is in excellent condition and does not have a scratch on it. I've never run the boat. Comes with CMB EVO2 hydro engine, all servos, hardware and includes the prop.

$750.00 or offer this boat is like NEW!

(4) CMB big-block engines 90's and 1.0's asking: $850 or offer will seperate

RCMD Sport 20 (Bob Finn boat) with CMB 3.5 valvola complete with K needle, all servos RTR less Tx/Rx $575 or offer this boat is like NEW!

1/8th Scale Hydro "YORK" complete less engine $875

I have several 1/8th Scale Hydros, Sport 45's, Sport 20's, Mono's etc.

Please don't lowball on the equipment as my stuff is in immaculant condition and always properly maintained and housed in a climate controlled shop. It's good stuff guys.

thanks, Tom Schaeffer

816-536-3703 or [email protected]

 

[FloridaScaleBoater]

Hey Tom;

Wish I had the money for some of your equipment,,

But a couple-a questions.

Could you add pictures of the inside of the sport-20 or at least let us know which Valvola is in it, green head, red head, red head RSV07?

What/who's hull is the York? pictures of the inside for sure, bottom wouldn't hurt either

The CMB big blocks, is that $850.00 for a pair?

 

[charles siler]

Can you email me some more pics of the York 1/8 scale thanks Charlie

[email protected]

 

[Ken Hildreth]

pic of the sp 20 inside

 

[toadstoys5]

that's $850 for all FOUR big block CMB's

I'll get photos out to everyone requesting such by early this evening

thanks for the inquiries

 

[Ken Hildreth]

Rick, I have seen that scale in person and I am still not sure who's hull that is. Ken

 

[Douglas P Shepherd]

IT IS A dps RACING HULL DOUG SHEPHERD MADISON, IN

 

[Ken Hildreth]

So that was the hull like you ran as the Winston back... well back when we were both younger. haha

 

[BigChuck]

Tom...looking for 1.0 P/S EVO2............Let me know if you have any.

 

[Jim Angier]

Hey Tom

What sport 45 s do you have

 

[mark couty]

Interested in other 1/8 scale hydros you have. E mail : [email protected]

 

[Shane Bastick]

Hi Tom,

please let me know if you were interested in selling the CMB 21 Valvola engine on its own

regards

Shane

 

[Gator 340]

Tom...can you check the I.D. of the P/S motors that you have. If they are the big bore I will take a couple off your hands...thxs

 

[ww29]

how much for one of the cmb 1.0 would like to be first for one if u will split them up if not let me know how much for both

 

[Don Ferrette]

Tom you have a p/m.

 

[björn hermanson]

You got PM

 

[mv301]

Interested in other 1/8 scales you might have. [email protected]

 

[Bert Dygert]

Tom,

PM Sent.

Bert Dygert

 

[bsmtboy2]

Pm sent

 

[Beau Parsons]

Tom

How much for the roadrunner hydro boat less motor, pipe?

Thanks

Beau