Renewed Talks about a 67 Novarossi Outboard Engine

[RonShaw]

Tunnel Guys and Gals,

I have restarted discussions with Novarossi on a possible 67 Novarossi Outboard Engine. I wanted to check again to gauge interest in an initial rollout of engines. I would like to try to place an initial run of 15 or 20 engines if possible. Please post here, send a PM, or email me at [email protected]. Thank you.

 

[Lennard Cuenco]

how does the .45 run? and which pipe is recommended for it?

didnt i read an IW thread where people had issues keeping them running? not drawing fuel in some cases...

 

[Andy Brown]

how does the .45 run? and which pipe is recommended for it?

didnt i read an IW thread where people had issues keeping them running? not drawing fuel in some cases...

The Nova 46 is the fastest two lap oval engine in the world (Martin Truex Jr.).

Original issues with the engines have been corrected.

 

[rumrunner]

You know iam in on nr 67 OUTBOARDS

 

[RonShaw]

how does the .45 run? and which pipe is recommended for it?

didnt i read an IW thread where people had issues keeping them running? not drawing fuel in some cases...

The Nova 46 is the fastest two lap oval engine in the world (Martin Truex Jr.).

Original issues with the engines have been corrected.

You are spot on. Thank you Andy. Anytime a manufacturer starts from scratch on a design, there will be initial hurdles to jump. I will say Novarossi knocked down the hurdles to get to a World Record design from concept to finished product, within 36 months.

 

[RonShaw]

You know iam in on nr 67 OUTBOARDS

Yes. I have you down for 6!!!!!....

 

[rumrunner]

Lol

 

[julianconde]

I might be interested in one

 

[RonShaw]

I might be interested in one

Ok

 

[jamie anderson]

what leg will this bolt up too?

 

[Wayne Johnstone]

What hulls are around to handle 1?

 

[RCRACER158]

If these engines produce the power to displacement ratio that the 46 does.... Look out because all the stuff you ran your K&B engines on won't be able to handle it.. Jimmy Johnson

 

[RonShaw]

what leg will this bolt up too?

We will work on a bolt pattern to match the old K&B 46 or 67 pattern. That way there are plenty of lowers such as K&B, Lawless, Hyperperformance, and others.

 

[RonShaw]

What hulls are around to handle 1?

Wayne,

There are many 67 hulls around such as the THOR, Proglass, Leecraft, HTB, and others.

 

[Paul Renna]

I'd like to sign up for one, please

I'd like to be sure our NX-400 (40" hull) can handle all that power

 

[RonShaw]

Paul,

Your 40" tunnel should handle the 67 with no problem at all.

 

[Wayne Johnstone]

Whats the lengths of the boats you quoted please ron if known

 

[RonShaw]

Wayne,

Lengths of the boats mentioned earlier range from 34-40".

 

[Wayne Johnstone]

So basically any hull that can handle a 46 outboard will handle the 67?

 

[RonShaw]

Wayne I would recommend 36 inches and up. The 34 inch tunnels are right on the ragged edge LOL.