Removing paint from a fiberglass hull ?

[riggerman]

Hi all my friend has a Prather 31 inch fiberglass deep vee set up for 4s electric . He painted the hull with Krylon spray can paint and is not happy with the results. What is the best way of removing paint from a Prather fiberglass hull ? Regards Andris Golts.

 

[longballlumber]

I've used citrastrip in the past on rattle can paints and fiberglass hulls. worked ok for me.

 

[Jarcaines]

I just got done using Klean Strip on a Phil Thomas Sport 40 last month. Turned out well, but it’s still a lot of work.

https://www.acehardware.com/departm...cleaners/paint-strippers-and-removers/1904929

 

[Roxyflash]

I have used aircraft stripper takes it right off as soon as it wrinkles scrap it off make sure you wear safety glasses and rubber gloves and long sleeves.If it needs more do it again in tight spots use scotch brite green scrubber pads then wash it off with water

 

[Roxyflash]

This boat was red ****** paint bought it used used aircraft stripper took three cotes then I had some dp 40 epoxy prime followed by panter pink imron paint