Push Rod Ends

[Buckshot]

Anyone know where I can find Nelson Hobby push rod ends?



-Buck-

 

[Mike Byer]

Anyone know where I can find Nelson Hobby push rod ends?



-Buck-

The black plastic ones with the metal ball at the pivot? what size, my local hobby shop has them, tower might but I have never looked there.

Mike B

 

[Buckshot]

Anyone know where I can find Nelson Hobby push rod ends?



-Buck-

The black plastic ones with the metal ball at the pivot? what size, my local hobby shop has them, tower might but I have never looked there.

Mike B

Yes Sir,

I'm looking for 3/32 and bigger.

Tower dosen't have them

-Buck-

 

[Mike Byer]

Yes Sir,

I'm looking for 3/32 and bigger.

Tower dosen't have them

-Buck-

what rod size would you be using, what thru bolt size are you using? I'll be shopping tomorrow or Tues, and I can pick you up some, if I don't have what you need.

mb

 

[Buckshot]

Yes Sir,

I'm looking for 3/32 and bigger.

Tower dosen't have them

-Buck-

what rod size would you be using, what thru bolt size are you using? I'll be shopping tomorrow or Tues, and I can pick you up some, if I don't have what you need.

mb

Hello Mike,

Looking for 3/32 Nelson ends for 4-40 rods, and if you can get them 1/4 ends.

-Buck-

 

[Mike Byer]

Usually the rod end eye is the same size as the control rod, a 4/40 rod end will use 4/40 rod and use a 4/40 thrubolt thru the ball end. When you say 1/4 you mean 1/4 scale, right? something like a 6/32 rod and thrubolt. Look up Dubro on tower they have the same style as Nelson.

http://www2.towerhobbies.com/cgi-bin/wti00...end&FVPROFIL=++

mb

 

[Tony Jacuzzi]

http://www.airwildpilotshop.com/MoreInfo-1...=product&id=165

 

[Buckshot]

Sorry for the confusion.

The rod ends I'm looking for are not threaded instead they have a metal end with two set screws that hold the push rod. They are 3/32 id for a 4-40 size unthreaded push rod and they have a larger id version for use with a 1/8" style rod.

Thanks for your help.

-Buck-