Parts Wanted PTO NR46DD

[John Beardslee]

Looking for the later style housing with lube hole.

 

[Joern Markset]

I have a complete assembly including flywheel if interested. It is new, has to come off a new engine who is still resting in an unopened bag.

 

[John Beardslee]

Thanks Joern
I’m interested but let’s give it a little time to see if something from the US becomes available.
John

 

[Rich Junker]

Looking for the later style housing with lube hole.

Hi John. Where is the lube hole located on the later style housing? I haven't seen one of those. I assume it's to get more lube to the rear bearing back at the flywheel.
Thanks.

 

[John Beardslee]

Rich
It is drilled through the piston relief cut on an angle to let fuel into the area between the two bearings of the pto housing.
John

 

[John Beardslee]

Rich
I’d be interested in an early housing that I can drill myself as long as the seal area not damaged.
Thanks, John

 

[Rich Junker]

Rich
I’d be interested in an early housing that I can drill myself as long as the seal area not damaged.
Thanks, John

Rich
I’d be interested in an early housing that I can drill myself as long as the seal area not damaged.
Thanks, John

Hey John. Unfortunately i don't have a extra one. I Just have the one engine that i run. I was just curious where the hole was located. Thanks for the info.

 

[JamesShields]

 

[John Beardslee]

Yes sir, that’s it right there. Thanks James! Both of mine are in engines and I was going to disassemble for a photo unless necessary.
John

 

[John Beardslee]

Is that pto for sale Jim??

 

[Rich Junker]

View attachment 330638

Thank you! James.

 

[JamesShields]

Just happened to have one apart for bearings

 

[John Beardslee]

Just happened to have one apart for bearings

Okay, I thought I’d ask.
Thanks, see you in January.
John