PT Stealth 45 Sport 40 Build

[larcor69]

This is how I mounted my third channel needle in my stealth sport 40 just an idea

 

[doug long]

Sport 40 is coming along well. Next up is the body work and prep and then it's off to get painted.

 

[Alan Elzer]

Sport 40 is coming along well. Next up is the body work and prep and then it's off to get painted.

Looking good Doug.

 

[FloridaScaleBoater]

Sport 40 is coming along well. Next up is the body work and prep and then it's off to get painted.

Looking real good Doug.
Are your header & pipe full length?
Looking for 10-1/2 to 10-5/8" length.

 

[doug long]

Looking real good Doug.
Are your header & pipe full length?
Looking for 10-1/2 to 10-5/8" length.

I have it set at 10-5/8" for now. When I get in the water I'll adjust as needed.

 

[FloridaScaleBoater]

I have it set at 10-5/8" for now. When I get in the water I'll adjust as needed.

Kewl, just looks long.

 

[doug long]

If there is an easier way to install the pool noodles in the PT stealth 45 sport 40, someone please tell us how.

 

[Grimracer]

Doug. I run them though the band saw and cut them in half (long way)

Grim

 

[P THOMAS]

If there is an easier way to install the pool noodles in the PT stealth 45 sport 40, someone please tell us how.

Go to menards get some pipe insulation I found the yellow foam is good not the soft black stuff

 

[doug long]

Primer layed down good. Still have some pin holes to fill.

 

[doug long]

Ist of many coats of automotive primer.

 

[FloridaScaleBoater]

Ist of many coats of automotive primer.

You go Boeeey!!
Make it happen.

 

[doug long]

You go Boeeey!!
Make it happen.

Thanks Rick

 

[doug long]

Had no time to work on the sport 40 this week, until today. Filled in all the pin holes on the cowl and applied 2nd coat of primer.
Will wet sand with 320 and apply the 3rd and final coat of primer.
Will have time this weekend to get working on the hull to get ready to paint next week.

 

[FloridaScaleBoater]

Had no time to work on the sport 40 this week, until today. Filled in all the pin holes on the cowl and applied 2nd coat of primer.
Will wet sand with 320 and apply the 3rd and final coat of primer.
Will have time this weekend to get working on the hull to get ready to paint next week.

Hell man,,, the primer looks like a good color.

 

[doug long]

Thanks Rick, wife picked up the primer and that is what she chose. lol

 

[SayMikey]

Make sure you add some carbon or wood under the back of cowl or your gonna be sick when it breaks

 

[doug long]

Make sure you add some carbon or wood under the back of cowl or your gonna be sick when it breaks

I layed carbon fiber along both edges of the cowl starting from the rear going forward about 6 inches long.

 

[SayMikey]

I layed carbon fiber along both edges of the cowl starting from the rear going forward about 6 inches long.

Good that will help a bunch

 

[doug long]

Second coat of primer, most of the pin holes are gone. Should have it finished by Monday afternoon. Had to do some repairs on the bottom of the boat around the plywood plate.