• If you have bought, sold or gained information from our Classifieds, please donate to Int'l Waters and give back.

    You can become a Supporting Member which comes with a decal or just click here to donate.

Sold PT sport40

Intlwaters

Help Support Intlwaters:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

mike menter sr

Well-Known Member
Supporting Member
Joined
Dec 25, 2008
Messages
121
Sport 40 with Cmb engine,pipe,radio, prop.. add fuel and receiver and race ..asking 450 usd you pay the shipping.. PayPal ff or Venmo.this is a Phil Thomas hull thanks ahead..
 

Attachments

  • IMG_0678.jpeg
    IMG_0678.jpeg
    1.8 MB · Views: 0
  • IMG_0677.jpeg
    IMG_0677.jpeg
    1.9 MB · Views: 2
  • IMG_0676.jpeg
    IMG_0676.jpeg
    1.9 MB · Views: 1
  • IMG_0673.jpeg
    IMG_0673.jpeg
    1.8 MB · Views: 1
  • IMG_0674.jpeg
    IMG_0674.jpeg
    1.8 MB · Views: 0
  • IMG_0675.jpeg
    IMG_0675.jpeg
    1.9 MB · Views: 0
  • IMG_0672.jpeg
    IMG_0672.jpeg
    1.9 MB · Views: 0
I am interested in it. what kind of shape is the motor in ? does it have life left in it ? And what servos does it have in it ? Also can you pull up on that motor are the mounts torn ? also I see the strut behind the prop looks mashed or funny is that just grease ?Could you check shipping to My address on pirate ship if I pm you my address?
 
Last edited:
I just received the boat and this is what kind of shape the engine and motor mounts were in. and the boat was cracked from the fin being pushed into the hull. It will at least need a engine case and a mount or set of mounts to get to be able to use it. I just cant run my boats in that condition.

You said you removed it to oil the engine before shipping and should have told me about the mount and I would have not bought the boat.
The engine was the investment in the deal. Also the pipe I thought you were sending a ops pipe and this is a mac 67 pipe. I just don't know how to go about this.
 

Attachments

  • IMG20240725172358.jpg
    IMG20240725172358.jpg
    235.9 KB · Views: 0
  • IMG20240725173523.jpg
    IMG20240725173523.jpg
    192 KB · Views: 0
  • IMG20240725173516.jpg
    IMG20240725173516.jpg
    171.6 KB · Views: 0
  • IMG20240725172416.jpg
    IMG20240725172416.jpg
    103.3 KB · Views: 0
  • IMG20240725172352.jpg
    IMG20240725172352.jpg
    147.7 KB · Views: 0
  • IMG20240725172337.jpg
    IMG20240725172337.jpg
    130 KB · Views: 0
  • IMG20240725172323.jpg
    IMG20240725172323.jpg
    119.4 KB · Views: 0
  • IMG20240725172312.jpg
    IMG20240725172312.jpg
    41.7 KB · Views: 0
I took the head off and it has major damage looks like a bearing or something has went through the motor.
 

Attachments

  • IMG20240725182335.jpg
    IMG20240725182335.jpg
    5.8 MB · Views: 0
  • IMG20240725182338.jpg
    IMG20240725182338.jpg
    5.7 MB · Views: 0
  • IMG20240725182350.jpg
    IMG20240725182350.jpg
    6.2 MB · Views: 0
  • IMG20240725182401.jpg
    IMG20240725182401.jpg
    6.2 MB · Views: 0
  • IMG20240725182407.jpg
    IMG20240725182407.jpg
    6.3 MB · Views: 0
  • IMG20240725182417.jpg
    IMG20240725182417.jpg
    6.2 MB · Views: 0
  • IMG20240725182948.jpg
    IMG20240725182948.jpg
    4.2 MB · Views: 0
I just received the boat and this is what kind of shape the engine and motor mounts were in. and the boat was cracked from the fin being pushed into the hull. It will at least need a engine case and a mount or set of mounts to get to be able to use it. I just cant run my boats in that condition.

You said you removed it to oil the engine before shipping and should have told me about the mount and I would have not bought the boat.
The engine was the investment in the deal. Also the pipe I thought you were sending a ops pipe and this is a mac 67 pipe. I just don't know how to go about this.
That’s not acceptable.

OP should refund the buyer and ship it back.
 

Latest posts

Back
Top