Prop recommendation for a Shaman 7.5

[Stephen Roberge]

Who do go to and what size should I start with for a Shaman 7.5 with a CMB purple head .45 running a stock K&B lower? Thanks in advance.

 

[Mike Hughes]

A pitched up 1450.

 

[john v]

mark sholund would be able to help you out with that prop

 

[Mark Anderson]

Mike, You forgot back cut

 

[Stephen Roberge]

mark sholund would be able to help you out with that prop

Thanks John

 

[Stephen Roberge]

Does anyone have Mark’s email or phone number?

 

[Mike Hughes]

Mike, You forgot back cut

Yep, I did.

 

[Stephen Roberge]

Thanks for the suggestions

 

[ChrisCapaldi]

Mark's website is: Props 4 U

 

[Stephen Roberge]

Mark's website is: Props 4 U

Thanks

 

[shoboat]

Stephen,

The Octura 1450 likes a little back cut on the trailing edge and cupped up to 3.60” to 3.75” of cup at .7 radi

Thanks For Reading,

Mark Sholund
My email is: [email protected]

 

[Stephen Roberge]

Stephen,

The Octura 1450 likes a little back cut on the trailing edge and cupped up to 3.60” to 3.75” of cup at .7 radi

Thanks For Reading,

Mark Sholund
My email is: [email protected]

Thanks Mark,
I’ll email you for a total with shipping.
Steve

 

[rumrunner]

If your looking to heat race don’t run the 1450 , two props abc 4760 or 4763

 

[rumrunner]

And mark has these or can get them

 

[Stephen Roberge]

And mark has these or can get them

Thank you

 

[Alan Elzer]

1815-19-38 is good to, very forgiving

 

[Ron Drake]

I would try H-6 Lynx Cut great choice

 

[Brandon Atwell]

With the hydro style props like these, don’t be afraid to drop that motor either. The shaman responds well to neutral or minute trim adjustments and low engine heights.

 

[JAMEYGALLIHER]

Has anything been done to the bottom of it , how much weight have you added and where did you put it , what pipe are you running all these are factors also . A worked over 4763 would be a good starting point