picco engine question

[byron westman]

are picco engines owned and or the same as nova rossi engines?

 

[HendricX]

Not in any way.

 

[picco lover]

are picco engines owned and or the same as nova rossi engines?

Picco marine motors are made in Italy by Alberto Picco

thanks neal

 

[Luca Gray]

If they were made by Novarossi they would,nt blow up

every second run...lol

 

[Mike Hallam]

If you blew up one of the new Picco 45 engines, it had to be human error. I have not heard of any issues since they were reintroduced back in April of this year.

 

[steve wood]

If you blew up one of the new Picco 45 engines, it had to be human error. I have not heard of any issues since they were reintroduced back in April of this year.

i heard they are breaking rods and crank pins.

 

[Mike Hallam]

Again, I haven't heard anything negative at all. No one has told me that any parts ordered are to replace broken rods or crank pins on the latest engine. I'd like to hear from anyone who has had any issues.

 

[Al Hobbs]

While there are many different model engine manufacturers in Italy, and some engine manufacturers make several different brand names, NovaRossi and Picco are owned by different families. Picco is owned by Gualtiero Picco. Picco makes several different brand names of car engines, but as of the last time I met with them, they only make one brand name of marine engines, branded Picco.

NovaRossi makes different brand names of car engines and different brand name marine engines.

NovaRossi and AXE Rossi are two different factories owned by two different families named Rossi.

Some engine manufacturers do some of the work for the other factories. Plus, some engine manufacturers use the same supplier to provide similar parts or services.

So, it can be easy to confuse which factory made which brand name engine.

 

[byron westman]

thanks for the info .I was just filtering out all the bs i hear.

 

[Mike Hallam]

Al,

Thanks for the clarification.

 

[Duck899]

If you blew up one of the new Picco 45 engines, it had to be human error. I have not heard of any issues since they were reintroduced back in April of this year.

i heard they are breaking rods and crank pins.

I would like to know as well if they are breaking rods and crank pins..... Could be just an isolated case? Thats the thing about the internet....one guy breaks a rod or a crank pin which can be human error or bad fuel or low oil content or a weak isolated part and the next thing you hear is they are breaking?????

I have heard more good things than bad about those new Picco 45's.....

 

[WIDEBOY]

I know of three PICCO 45 that have broken rods and destroyed the liner in Australia.

 

[picco lover]

I know of three PICCO 45 that have broken rods and destroyed the liner in Australia.

yes you are right wideboy there have been 3 that have broken rods (BUT) these motors are not straight out of the box ...... these motors are fully worked as far as one can take it Or in the case of the 3 motors TOO FAR

it all depends on how far you want to go

as like any motor the more you mod it the better chance of it not holding together or something going wrong

i have a few in my boats and i have had no problems with the motors they are worked a little but not much

as soon as you mod the motors then your supplier will not cover you for replacing the parts that you break

so as for picco breaks

well you mod them at your OWN risk

like i have always said

go and buy a supper car and then add a NOS KIT ( when the motors is not designed for them and put your foot down flat out with your brand new car and see how long it last for :blink: )

 

[picco lover]

As for the motors they are a very tight fit ( piston and sleeve) must run them in right

then you will get a good seal ...

i have put though 4 lt though mine and i still need to run her a bit rich

thanks neal

 

[Luca Gray]

Picco Lover

there you go A STOCK new picco, kaboom"

so its not just mod motors.. :angry:

there is a issue with the new picco motors(rods)..

Big Question are PICCO going to anything about this problem

or not to long picco will be gone again..

Luca

 

[picco lover]

Picco Lover

there you go A STOCK new picco, kaboom"

so its not just mod motors.. :angry:

there is a issue with the new picco motors(rods)..

Big Question are PICCO going to anything about this problem

or not to long picco will be gone again..

Luca

Hi Luca

can you please give me more info ect oil nitro prop boat pipe length ect as there are a lot of reasons for motors to let there rods go

iam running 5 picco 45( NO PROBS) i have done for the last 6 weeks

just got home from the lake and had a great day ??????

i run %18 Klots Oil %60 nitro and %22 meths

i run them in right and yes they are a very tight motor and i heat cycle the piston and liner

how much fuel have you put through the motor ???

it has taken me about 5LT to get the motor run in

thanks neal

 

[jason jury]

hi all i have been running the new picco 45 since june this year in a sgx 45 rigger, my engine is stock out the box and prefroms great to me. i am swinging , h22,and also 1657, with ease.. i run 50% nitro , 15% total oil , 12% klotz and 3% castor, pipe is a/b xt set between 8.75 to 9 inches. odonell blue plug, love this engine got my vote indeed..

 

[picco lover]

Hi jason

iam the same as you mate

iam running a 1655 ( Aarons ) great prop it will pull a 1860 as well no problems

just pulled my motor down tonight 5LT of %60 Nitro %18 oil (KLOTS)

all like new inside i have been clock at 125km loving every run

but i do not run her to lean and i look after her after every day of running

great to here about your picco 45

ps anything you need (picco pipe that is what i run (Cheap too )) Jason just email me i will get it in a overnight bag to you

thanks neal

 

[scootertrash]

nitro freek has a few op the new 45s as well as a bunch of the larger older ones.he runs them hard and they stay together.they are very fast motors.

 

[Joe Warren]

I had a chance to tear down a new 2009 picco 45 that belonged to Buddy lowe @ charleston. The new Picco 45 Must have the 303 .100th longer flywheel cone.(aftermarket item) it appears to be a excellent engine & with a little break in will last many many years. I have not seen a rod problem if manintain properly. jw