• If you have bought, sold or gained information from our Classifieds, please donate to Int'l Waters and give back.

    You can become a Supporting Member which comes with a decal or just click here to donate.

OS 21xm, SPP pipe

Intlwaters

Help Support Intlwaters:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

BradSpencer

Well-Known Member
Joined
May 7, 2009
Messages
890
Hi guys,

Starting to clear out some more gear.


Both of these engines are strong runners.

1. OS 21xm V2 powerheard -RG piston and sleeve, ceramic bearings. P/S till need a little more breaking in. $230 US SOLD
engine 1 1.jpeg engine 1 2.jpeg engine 1 3.jpeg engine 1 4.jpeg engine 1 5.jpeg
2. OS 21xm V2 powerhead - RG piston and sleeve. Bearings and P/S fresh. $230 US SOLD
engine 2 1.jpeg engine 2 2.jpeg engine 2 3.jpeg engine 2 4.jpeg engine 2 5.jpeg
3. New SPP RS21 outboard pipe. Comes with pressure fitting. $110 US

4. Pressure fittings(11 available) $6 US each ALL SOLD

Shipping to US addresses $20 US(includes tracking).
Will Ship to other countries, ask for shipping price(should be very similar to the US shipping rates).
Payment by paypal.
Please allow a day or two for me to get to the post office, will get them shipped ASAP
 
Last edited:
Hey Brad, how does the RG piston and sleeve stack up against the stock sleeve? Any real performance difference positive or negative?

I will take the first engine if I can shoot you payment over Sunday!
 
Hi Brandon,
Never did much testing with a standard p/l. Wouldnt expect any performance gains, liked being able to flow the RG sleeves, and found they ran strong for much longer.

No rush on payment.
 
I'll take engine number 2. Do you have any stock pistons and sleeves you want sell?
Hi, the case on these engines have been bored out so the the RG sleeves fit without needing to modify or reduce the thickness of the RG sleeve.
The stock sleeves wont fit these engines.
I will be listing my entire OS inventory including NIP pistons/sleeves.
I also have new RZ piston liners which will fit these engines, they gave pipe timed exhaust port which will work great with a tune pipe.
 
Brad I didn't.realize the case had been bored I'm going to pass on the engine.
No problem, I actually forgot i set these engines up this way. Will update the first post.
Best way to go if you intend on running the ABC RG sleeves, If you intend to run the standard ABN sleeves a standatd case would be needed.
 
Back
Top