- Joined
- May 25, 2006
- Messages
- 2,497
Time to thin down some of this stuff.
OPS90 with 1/4" Aeromarine collet., OEM header, and spare header gasket. compression is as new (super bump at TDC) - $300
OPS90 rod circlip NIP - $4
OPS90 rod needles NIP - $12
OPS90 front housing, excellent seal bore, will install new WIB bearings for buyer - $60
OPS90 rotor drive, used - $10
Bundle all of the OPS90 items - $360
OPS67 Converted DF motor NIB (have 2 ea) - $235 (w/ aeromarine collet) OPS67 used drum rotor motor, Excellent compression, billet front bearing hsg, slide valve carb, Aeromarine collet - $200
OPS67 used disk rotor motor, Aeromarine carb, SQ drive, excellent compression - $175
OPS67 head buttons many new and lightly used, various CC sizes. - $17(new), $10 (used)
OPS67 twin plug head button and cap - $25 OPS67 disk housing/rotor(many) - $15
OPS67 speed crank (Tungsten slugged) - $40
Several P/L sets of different types. All used - $20 ea
OPS rods (used) - $15 ea RPM rod (used) - $25
Twin plug head button/cap - $35 (new), $25 (lightly used)
Submerged (cooled) plug head caps - $20
Many other OPS 67 parts: gaskets, wrist pins, flywheels, assorted head shims, sleeve shims, front housings, rear housings/rotors, headers, exh cooling plates, carbs, Aluminum and brass flywheels,, etc. Just ask.
Thanks,
Jon
OPS90 with 1/4" Aeromarine collet., OEM header, and spare header gasket. compression is as new (super bump at TDC) - $300
OPS90 rod circlip NIP - $4
OPS90 rod needles NIP - $12
OPS90 front housing, excellent seal bore, will install new WIB bearings for buyer - $60
OPS90 rotor drive, used - $10
Bundle all of the OPS90 items - $360
OPS67 Converted DF motor NIB (have 2 ea) - $235 (w/ aeromarine collet) OPS67 used drum rotor motor, Excellent compression, billet front bearing hsg, slide valve carb, Aeromarine collet - $200
OPS67 used disk rotor motor, Aeromarine carb, SQ drive, excellent compression - $175
OPS67 head buttons many new and lightly used, various CC sizes. - $17(new), $10 (used)
OPS67 twin plug head button and cap - $25 OPS67 disk housing/rotor(many) - $15
OPS67 speed crank (Tungsten slugged) - $40
Several P/L sets of different types. All used - $20 ea
OPS rods (used) - $15 ea RPM rod (used) - $25
Twin plug head button/cap - $35 (new), $25 (lightly used)
Submerged (cooled) plug head caps - $20
Many other OPS 67 parts: gaskets, wrist pins, flywheels, assorted head shims, sleeve shims, front housings, rear housings/rotors, headers, exh cooling plates, carbs, Aluminum and brass flywheels,, etc. Just ask.
Thanks,
Jon
Last edited by a moderator: