Shane Bastick Well-Known Member Joined Jan 11, 2011 Messages 3,757 Sep 8, 2015 #1 Has anyone tried the 2015 OPS Next 21 engine at all, any thoughts on its performance
stan simpson iv Well-Known Member Joined Sep 5, 2011 Messages 1,039 Sep 8, 2015 #2 Rene Danner has a video of his 21 rigger with one on here somewhere. It runs very good with the setup he has. I am sure he will tune in.
Rene Danner has a video of his 21 rigger with one on here somewhere. It runs very good with the setup he has. I am sure he will tune in.
Rene Danner Well-Known Member Joined Jun 7, 2009 Messages 877 Sep 8, 2015 #3 Yup been running one for a while in RR very good results. Here is the vid. https://youtu.be/Y_rD7QxiuCY Last edited by a moderator: Sep 8, 2015
Yup been running one for a while in RR very good results. Here is the vid. https://youtu.be/Y_rD7QxiuCY
David Bryant Well-Known Member Supporting Member Joined Sep 7, 2011 Messages 2,407 Sep 8, 2015 #4 very nice!
Shane Bastick Well-Known Member Joined Jan 11, 2011 Messages 3,757 Sep 8, 2015 #5 looks great, thanks for the info
Rene Danner Well-Known Member Joined Jun 7, 2009 Messages 877 Sep 8, 2015 #6 Thanks Guys, On a side note I am using a F Orlic carb (.338) and head clearance is at 8 thou, SPP carbon Nova Pipe a 8 " and a 1815 prop from Mark..
Thanks Guys, On a side note I am using a F Orlic carb (.338) and head clearance is at 8 thou, SPP carbon Nova Pipe a 8 " and a 1815 prop from Mark..
Shane Bastick Well-Known Member Joined Jan 11, 2011 Messages 3,757 Sep 8, 2015 #7 thanks, I guessing though the Orlic carb would be impossible to get now to run on an OPS
Rene Danner Well-Known Member Joined Jun 7, 2009 Messages 877 Sep 8, 2015 #8 No they have the same neck dia (15mm) as most carbs. So you have a lot of carb options..