• If you have bought, sold or gained information from our Classifieds, please donate to Int'l Waters and give back.

    You can become a Supporting Member which comes with a decal or just click here to donate.

Sold OPS 15cc

Intlwaters

Help Support Intlwaters:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Duck899

Well-Known Member
Joined
Jun 11, 2002
Messages
3,212
Ops 90 for sale, twin plug head, not used much, great compression, runs fine, smooth bearings. 1/4” collet.
$250 US shipped
 

Attachments

  • IMG_0831.jpeg
    IMG_0831.jpeg
    3.1 MB
  • IMG_0833.jpeg
    IMG_0833.jpeg
    2.3 MB
  • IMG_0832.jpeg
    IMG_0832.jpeg
    1.7 MB
  • IMG_0835.jpeg
    IMG_0835.jpeg
    3.5 MB
  • IMG_0834.jpeg
    IMG_0834.jpeg
    3.8 MB
Here ya go, looks like new
 

Attachments

  • IMG_0847.jpeg
    IMG_0847.jpeg
    3.4 MB
  • IMG_0846.jpeg
    IMG_0846.jpeg
    3 MB
  • IMG_0845.jpeg
    IMG_0845.jpeg
    1.9 MB
  • IMG_0849.jpeg
    IMG_0849.jpeg
    2.1 MB
  • IMG_0848.jpeg
    IMG_0848.jpeg
    2.4 MB
Frank you're a sport dude! Figured you were in pretty good shape. Only have one of these guys so looking for a spare or two incase I like them.

Thanks bro! I haven't forgotten about the start pulley, in fact it's sitting on my lathe. It will be the NEXT lathe project. Figured just turn a spindle +- the OD of the pulley, face it and drill/tap, bolt pulley rear face up to spindle and have a go at it to remove unwanted material. I don't want to send you a POS that has end runout that would annoy me. :)

This gives me renewed motivation!

DSCN0381S.JPG

===================================================================================================

ENGINE IS SOLD.

Please PM payment information for the OPS.
 

Attachments

  • DSCN0380S.JPG
    DSCN0380S.JPG
    558.1 KB
Back
Top