OPC Tunnel

[Paul Pachmayer]

Hey Guys,

Just finished mounting up the OB unit on the Villain. Look out MI cup racers, there's a new OPC sherrif in town, lol.

Paul.

 

[brooks93]

that mount is slick.. love the leg too

 

[forresterace]

OK Paul - tell us about the molded lower leg. It looks like injection-molded plastic (filled?). Then, tell us about the mount. Please and thank you, sir

 

[J Solinger]

Hi Paul, I'm in the process of making some motor adapter plates and was wondering what cable collet you have there.

 

[Paul Pachmayer]

Hi Guys,

The lower unit is from Irwin, it's his new leg for the stock OB nitro class. I think it's going to be coming out in the spring but if you call him I think you can get the leg now. It is a composit (plastic) but I can't say what type. The mount is from Capt. Vic, he's on the board and you can pick them up from him. The mount is a slick piece to say the least. His email is [email protected] so you can contact him.

J, I'm not sure where to get that collet, it's a 5mm to square drive that I had. Have no clue where it came from but it works perfect. I'm running a stock K&B cable and the fit is right on. The only thing I got was the plastic leg itself, I had to fab up the rest from parts I had lying around.

Paul.

 

[LOU]

Hey Paul, What prop are you running :huh:

 

[Paul Pachmayer]

Hi Lou,

Hey Paul, What prop are you running

I have no clue. :wacko: This is my first tunnel so it's all guess work. I'll be happy if the thing floats let alone run right, lol. B)

Paul.

 

[Russell Bear]

Hi Guys,
The lower unit is from Irwin, it's his new leg for the stock OB nitro class.  I think it's going to be coming out in the spring but if you call him I think you can get the leg now. It is a composit (plastic) but I can't say what type.  The mount is from Capt. Vic, he's on the board and you can pick them up from him.  The mount is a slick piece to say the least.  His email is [email protected] so you can contact him.

J, I'm not sure where to get that collet, it's a 5mm to square drive that I had.  Have no clue where it came from but it works perfect.  I'm running a stock K&B cable and the fit is right on.  The only thing I got was the plastic leg itself, I had to fab up the rest from parts I had lying around.

Paul.

89294[/snapback]

​

Here's the link to Capt Vic's post on his mounts....

http://www.intlwaters.com/index.php?act=At...pe=post&id=3503