NX300 - Getting Excited

[normlee]

Got the hull is back from the painter. I can't seem to find the NX build instructions to work out radio box setup for 3 ch and tank setup. If someone can send a couple pics would be great please.

Cheers

 

[julianconde]

Got the hull is back from the painter. I can't seem to find the NX build instructions to work out radio box setup for 3 ch and tank setup. If someone can send a couple pics would be great please.

CheersView attachment 273002 View attachment 273003 View attachment 273004

Look at my
Radio box you can do something similar. Hope this helps

 

[MarkScott]

Norm,

Here's my setup on my NX-300

Savox digital on all.

I'll be changing over to metal for next year. This boat is about had it.

 

[normlee]

Thanks! Is that a single 8oz tank?

 

[MarkScott]

yep, single 8oz tank. And it will draw it dry. I'm running the Ferrette / OS 3rd channel mounted high on the transom.

 

[normlee]

Thanks Mark!

 

[MarkScott]

Enjoy! Cheers!

 

[Kris Flynn]

is there a savox which is equiv (more so the size and similar specs) to a hitec HS85MG?

BTW, boat looks great in those colours

 

[Daniel's Racing]

is there a savox which is equiv (more so the size and similar specs) to a hitec HS85MG?

BTW, boat looks great in those colours

https://www.savoxusa.com/products/savsh1250mg-mini-size-digital-servo

 

[MarkF]

Kris
Look at these servos. The new top of the line brand.
http://www.promodeler.com/Brushless-Mini.aspx

 

[normlee]

Thanks!

 

[LarryConrad]

.The Promodeler micro servos are rated for 8.4 volts, and have 25 spline output shafts like standard size Futaba servos. The 100 oz. torque rating is over kill for throttle and 3 rd channel applications though.

 

[Kris Flynn]

WOW, thanks for the help gents. Was hoping for a lower priced alternative without going to the hobbyking stuff.

I think I will stick with the Hitec HS85MG for my throttle and 3rd channel for now on the 20 boats

Sorry for the questions in your thread Norm

 

[Kris Flynn]

http://www.promodeler.com/DS100DLHV

Actually just looked at these better...they might be a good way to to go!

 

[Geraghty]

Take a look at these..............I just bought the [4] servo pack for $17.50 and they are nice...full metal geared all the way through...

http://www.valuehobby.com/radio-systems-servos/servos.html?p=2

 

[MarkScott]

Steering servo is a SC-1258 and SH-257 micro's.

 

[normlee]

What a read.

Maybe they should have considered making it the same footprint as the HS5085MG for direct replacement .

 

[normlee]

A $5 servo scares me for use with the throttle....

 

[normlee]

Any suggestions to a starting pipe length for Keep 21 and NR21 SPP please?

 

[julianconde]

Any suggestions to a starting pipe length for Keep 21 and NR21 SPP please?

I have the same Power and pipe I would start around 8”